Export RSS des offres - Seulement les offres à la une : Non / Zone géographique : Afrique

2026-43350 - Instrumentation Maintenance Specialist M/F

Tue, 19 May 2026 14:37:28 Z

Type de contrat : Durée déterminée
Description du poste :
SPIE Global Services Energy is currently looking for Instrumentation Maintenance Specialist to join its workforce here in Nigeria on ERHA project. Key Responsibilities: Instrumentation Maintenance – FPSO Scope Perform preventive, predictive, and corrective maintenance on FPSO instrumentation including:Pressure, temperature, flow, and level transmitters Process and utilities instrumentation Fiscal and allocation metering instrumentation Analytical systems (GCs, water cut, BS&W, H₂S, O₂, moisture, pH/conductivity) Maintain and troubleshoot control valves and final control elements (pneumatic, hydraulic, electric actuators, ESD valves, MOVs interface instrumentation). Diagnose and resolve control loop issues from field device through I/O, PLC/DCS, to final element. Support FPSO-specific systems such as: Cargo, offloading, and marine systems instrumentation Utilities (power generation, water treatment, air, nitrogen), Turbine and compressor package instrumentation, Tank gauging and custody transfer support systems Execute and document work in the CMMS (SAP), maintaining accurate history and technical feedback. Control & Safety-Critical Systems Maintain and test Safety Instrumented Systems (SIS) including: ESD (Process, Marine & Utilities), Fire & Gas detection systems Conduct Safety Integrity Level proof testing, functional testing, loop checks, and cause‑and‑effect verification in line with site procedures. Support DCS/PLC systems through I/O checks, signal verification, field interface troubleshooting, and commissioning support. Participate in MoC, FAT, SAT, startup, shutdown, and FPSO life‑of‑field modifications. Mentoring, Coaching & Training (Core Expectation) Act as a technical mentor for offshore instrumentation technicians, providing hands‑on coaching, job guidance, and technical leadership. Support competence assurance programs by: Identifying skill gaps Coaching technicians through task-based assessments Verifying work quality and safe execution Deliver on-the-job training in: Calibration techniques and best practices Control valve maintenance and diagnostics Analyzer maintenance and sample systems SIS and Fire & Gas testing procedures Promote consistency and quality by:Reviewing completed work and documentation Reinforcing standards, procedures, and good engineering practice Capture and share lessons learned, recurring failure modes, and best practices to improve team capability and reduce repeat failures.

Key Competencies Technical Competencies Advanced knowledge of FPSO instrumentation and control systems. Strong diagnostic and troubleshooting capability under offshore operational constraints. Working knowledge of DCS/PLC systems, field communication protocols (4–20 mA, HART, Fieldbus, Modbus). Experience maintaining SIS, Fire & Gas, and ESD systems. Proficient with calibration and diagnostic tools and valve diagnostic equipment. Coaching & Leadership Competencies Proven ability to mentor and develop technicians in a live production environment. Clear communicator, able to explain complex concepts practically and safely. Leads by example in safety, work quality, and professional conduct. Committed to knowledge transfer and sustaining offshore competence. Behavioral Competencies Safety‑first mindset and strong risk awareness. Calm, methodical problem-solving under pressure. Team-oriented, able to work effectively with Operations, Marine, Electrical, and Engineering teams. Qualifications & Experience Education: Diploma/HND/B.Sc. in Instrumentation & Control, Electrical/Electronics, Mechatronics, or related discipline. Experience: 7–10+ years experience in instrumentation maintenance within oil & gas or similar process industries. Demonstrated FPSO or offshore production facility experience. Proven experience mentoring or training technicians offshore. Certifications (Mandatory / Preferred): CompEx or IECEx certification Offshore survival and medical certification (BOSIET/FOET or equivalent) Functional Safety (IEC 61511 / TÜV – preferred) OEM training (Emerson, ABB, Siemens, Yokogawa, Honeywell, Endress+Hauser)
Lieu de travail : OFFSHORE
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42651 - ELECTRICAL FOREMAN M/F

Tue, 19 May 2026 11:18:53 Z

Type de contrat : Durée indéterminée
Description du poste :
Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required; The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 3 to 5 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have proven ability as a leader of small teams. Perfectly competent and independent in his field, he must show common sense and organisational ability. Natural authority, founded on his abilities and on the trust he has in his teams, is essential.

HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Have a good understanding of COMPANY HSE rules. ✓ Assists the Supervisors on field to spread the HSE policies and to put the rules in place. ✓ Ensures that the team under his responsibility (if any) has well understood group policies and apply them ✓ Assist supervisor to write on a daily basic risks analysis for specific intervention. ✓ Participate to safety talk before and after intervention ✓ Ensures that employees under his responsibility (if any) have the required habilitation. ✓ Participates to key procedure audits in proactive manner; ✓ Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations ✓ Organises and performs on site the maintenance operations which are placed under his responsibility, ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures that all maintenance and repairs to plant and equipment are carried out in a safe and efficient manner and in strict compliance with COMPANY operating procedures and any relevant statutory legislation in order to maintain all such equipment in sound and safe operating condition. ✓ Manages interventions using the CMMS, ✓ Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of systems placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the Supervisor request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts and Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.
Lieu de travail : GIRASSOL FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-43345 - INSTRUMENTATION FOREMAN ** M/F

Mon, 18 May 2026 14:58:20 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Have a good understanding of COMPANY HSE rules. ✓ Assists the Supervisors on field to spread the HSE policies and to put the rules in place. ✓ Ensures that the team under his responsibility (if any) has well understood group policies and apply them ✓ Assist supervisor to write on a daily basic risks analysis for specific intervention. ✓ Participate to safety talk before and after intervention ✓ Ensures that employees under his responsibility (if any) have the required habilitation. ✓ Participates to key procedure audits in proactive manner; ✓ Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations ✓ Organises and performs on site the maintenance operations which are placed under his responsibility, ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures that all maintenance and repairs to plant and equipment are carried out in a safe and efficient manner and in strict compliance with COMPANY operating procedures and any relevant statutory legislation in order to maintain all such equipment in sound and safe operating condition. ✓ Manages interventions using the CMMS, ✓ Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of systems placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the Supervisor request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts and Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 3 to 5 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent)
Lieu de travail : GIRASSOL FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-43317 - Cargo Management Officer M/F

Fri, 15 May 2026 22:27:13 Z

Type de contrat : Contrat international
Description du poste :
SPIE Global Services Energy is currently looking for Cargo Management Officer to join its workforce in Angola. Key Responsibility: Assist the Service Head in preparing the “Price Meeting” dossier for quarterly submission to MIREMPET/MINFIN. Calculate and monitor demurrage processes for all operated blocks:Verify and validate demurrage invoices from partners. Calculate and re-invoice demurrage for non-operated blocks. Assist in preparing the demurrage file for submission to the concessionaire and Trading for cost recovery (as per PSA B17 and B32). Assist in preparing the delegated budget, including:Trading commercial support Customs/agent fees and charges Demurrage and well operations (WO) Prepare monthly reports on actuals and budget monitoring. Prepare and submit the Monthly Crude Export Report to MIREMPET and AGT. Prepare and internally distribute the monthly summary of cargoes and selling prices, including a 3-month forecast. Manage electronic filing (shipping documents, telex, cargo documentation, fund requests, invoices). Organise and maintain files for audit purposes. Process invoices from agents (TEPA and partners), demurrage, and re-invoicing to TEP Congo. Send documentary instructions and payment confirmations to agents. Prepare the Annual Export Guide via SMF (Fiscal Measurement System), AGT and MIREMPET portals. Manage REX Certificate validity and renewal every 5 years with MINDCOM. Monitor cargoes, prices, and cost forecasts using the database system. Track CAPEX vs invoices. Ensure each cargo file is complete:Confirm all entitlements are respected at closing Update and archive documentation Harmonise procedures across all blocks Produce a monthly cargo report.

Qualifications Academic level: BAC +2 (Diploma) in Economics / Management / Finance Experience Minimum 5 years of professional experience Skills and Knowledge Good understanding of crude cargo management practices Knowledge of accounting principles Basic knowledge of tax and customs regulations related to exports Strong analytical skills, rigour, and organisational ability Dynamic, team-oriented mindset Good interpersonal and communication skills Languages: English and Portuguese – mandatory
Lieu de travail : TotalEnergies Luanda Offices
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-43319 - QA Lead (M/F) M/F

Fri, 15 May 2026 15:49:09 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking suitable candidate to fill the position of QA Lead to join its work force in Nigeria. Responsibilities include: Build and implement the Quality Management System (QMS) and provide necessary support for the portfolio of projects Develop and submit for approval to the QAQC Portfolio Manager the key generic QA documents for PPM, including Generic Quality Manual, Generic Project Quality Plan, Internal Audit procedure, etc. Establish with the QAQC Portfolio Manager a generic QMS framework and define its Key Performance Indicators, cascaded and adapted to each project governed by PPM Present the generic QMS to project teams, and monitor relevant personnel on its implementation, ensuring consistent application of QMS procedures and quality standards across the portfolio Assist the QAQC PP Manager in managing QA deliverables for each project. Assist the QAQC PP manager to drive Contractor Quality Assurance and Compliance across the Portfolio Organize, lead and expedite external quality audits of Contractors and Subcontractors, ensuring their QMS and execution practices are in full compliance with projects and PPM requirements Actively participate in the qualification and assessment process of Contractors engaged on projects governed by PPM, ensuring only compliant and capable entities are approved for execution Investigate identified QA issues and propose solutions/improvements to the concerned Contractors Monitor external audit findings and remarks, and any other reported quality teams through periodic meetings with Contractors Ensure Projects execution activities comply with company rules & project policy and procedures. Govern Non-Conformance, Deviation & Derogation Management and Continuous Improvement Support the QAQC Portfolio Manager in the systematic follow-up and closeout of Deviations and Derogations, ensuring proper documentation, traceability and resolution in line with the QMS requirements Capture, consolidate and Lessons Learned arising from non-conformances, audits and project experience, feeding continuous improvement across the portfolio and promoting a culture of quality excellence Report at Portfolio Level on Quality matters to alert on trends and risks, and propose remedial actions Ensure accurate and consistent reporting of all Quality assurance activities across projects Facilitate Root Cause Analysis (RCA) on significant quality failures or recurring issues, ensuring corrective and preventive actions (CAPA) are properly defined, assigned and tracked to closure Maintain and update the portfolio-level quality risk register, ensuring identified risks are mitigated and monitored throughout the project lifecycle Review and report to the QAQC PP Manager any quality problems or difficulties raised by QA/QC projects team members Carry out any other duties as may be required by hierarchy and PPM.

ACCOUNTABILITIES The QA Lead reports directly to the QAQC Portfolio Manager (PPM) and supports him in developing, implementing and improving the Quality Management System across the project portfolio. The job holder shall ensure that all quality activities are carried out in compliance with company rules, project procedures and applicable industry standards, and that Contractors and Subcontractors always meet the required quality expectations. The QA Lead shall identify quality risks early, ensure that non-conformances, deviations and derogations are properly documented, followed up and closed out, and report any significant quality concern to the QAQC PP Manager in a timely manner. Qualifications/Experience required Bachelor's degree or equivalent in Industrial or Mechanical Engineering, or a related technical discipline Certification in NDT, Welding or Coating inspection (CSWIP, IWE, FROSIO/NACE) is an advantage Professional Experience in similar position (number of years): more than 5 years Good knowledge in QMS, construction, pipe laying, metallurgy, Welding, NDT, coating and pre-commissioning Good knowledge in construction codes and international standards used in O&G industry Good communication skills. Good team player, able to communicate effectively with colleagues Proficiency with Microsoft applications.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43315 - Planning & Reporting Engineer* M/F

Fri, 15 May 2026 08:45:39 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for Planning & Reporting Engineer to join its work force in Nigeria. Activities to perform: Build TEPNG Project Management System Propose appropriate work breakdown structure for each project that is appropriate and standardization and consolidation of reporting, streamlining reporting routines. Support the CMS (to be followed by PPM) by identifying all associated planning projects (trackers) & reporting (dashboards), estimation (benchmarks) generic documents, templates, forms standardizing method and improving quality and efficiency, in line with head quarter procedures and guidelines. Support the updating of annual PPM schedule, project L 0 & 1 related to the COMEX file, follow up on the SRA for these files and PR2 /3 and 4 review related to schedule and reporting follows up and simplifies processes between projects and other entities, clarifying responsibilities and involvements. Control the portfolio Manage the Work Time Schedule in relation to the Exhibit C for each package and integrate other services such as drilling and OPS.to consolidate the various project schedules & reports into various key schedule /milestone and manning levels for each activity for the PPM activities. Monitor implementation of the work breakdown structure, Schedule, progress measurement and reporting procedures, using appropriate tools. Developing and maintaining schedules at project level, with analysis of critical path and potential clashes and proposal of remedial actions/solutions. Ensuring availability at all times of an updated and accurate scheduling and progress measurement documentation. Ensuring reporting at Project level (issue of Weekly reports, Monthly Status Report...) Identify high level Risks (overruns, DLDs) and opportunities at portfolio level with mitigation actions. To lead (from planning and reporting point of view) in the preparation / consolidation and review of the various Project schedules and report updates (internal and external / Annual and Multiyear) with inputs from the members of the Project Team and provide “ad hoc” plans support as required. Provide support and resources to projects Propose support and Manage services on behalf of projects when required. Improve and learn from experience Gather and share lesson learned from projects Nigeria regarding project performance including project schedules benchmarks with Onetech. Share regular feedback with local contractors to better work together from one project to another.

QUALIFICATIONS / EXPERIENCE REQUIRED Minimum bachelor’s degree or equivalent in accounting and or similar background. Typically, 20 years of oil and gas industry professional experience of which at least 10 years in an equivalent position as a lead planning, reporting and risk engineer.
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43141 - Wellsite Subsea Engineers M/F

Wed, 13 May 2026 08:54:04 Z

Type de contrat : Interim
Description du poste :
Key Activities: - Manage interfaces between subsea equipment suppliers, SPS department and drilling rig during well operations. - Coordinate and witness subsea equipment SIT, offshore testing and installation activities, when required (i.e. Landing String system, IWOCS, etc.). - Assisting Drilling superintendent on subsea BOP troubleshooting - Reviewing and commenting on technical documentation produced by the contractors (e.g. technical reports, specifications, procedures, drawings, etc.) ensuring the implementation of the established procedures and good engineering practice. - Review configuration of subsea Landing String equipment, such as the Subsea Test Tree (SSTT) space-out inside the BOP, lubricator valve positioning, retainer valves functionality, and surface flow tree. - Act as focal point for the rig contractor and completion, well intervention, and subsea equipment suppliers to finalize the rig layout, optimizing onboard equipment positioning and defining any required rig modifications (e.g., control umbilical routing, surface equipment placement, coiled tubing lifting frame installation, Landing String and XT IWOCS umbilical arrangement).- Follow up offshore operations on the drilling rig for landing string operations and well testing - Follow up offshore operations on the drillship for landing string operations and well testing - Solid knowledge of horizontal X-tree system and subsea completion operations, including tubing hanger installation and crown plug installation/retrieval. - Solid knowledge of IWOCS (Intervention Workover Control System), including but not limited of system set up - Solid knowledge of subsea electro-hydraulic (EH) landing string systems and related completion operations. - Solid knowledge of subsea slickline operations Resolving ongoing technical issues concerning all aspects of subsea equipment. - Proven ability to identify and resolve technical and operational issues related to subsea equipment throughout all project phases. HSE Requirements Comply with requirements of Safety, Health and Environmental laws of the Country. Obey the Company Policy on Safety, Health and Environment and aim at achieving the Company's HSE strategic objectives. Practice Company's HSE Management System. Provide safe and healthy conditions of work to subordinate personnel and control over compliance by the personnel with safe, labor protection rules and regulations. Assure the application of all the relevant HSE procedures and standards in organization and development activities. Ensure, supported by the HSE structure, training and staff development on HSE aspects. Ensure that all contractors are competent and fully knowledgeable of Project HSEQ procedures. Prepare the field development strategy, including preliminary contracting strategy and Project HSE Plan. Supervise the preparation of the risk register and the relevant mitigation strategy to address identified uncertainties and managing the risks. Sup

Subsea Engineer with Baker Hughes IWOCS and Horizontal Xmas Tree experience Purpose: Subsea Completion Engineer will be responsible at wellsite for managing interfaces between subsea equipment and drilling rig, ensuring readiness of documentation and equipment, and supporting testing, installation, and commissioning activities during well operations for an ultra-deep water project. In addition, to support the Drilling and Completion & Development team in the engineering, design, manufacturing, testing and installation of subsea production systems focusing on landing string operations, IWOCS system setup, well testing, slickline and subsea completion operations. To assure that the design meets project requirements, applicable standards and engineering best practices. Main Responsibilities: - Responsible for the planning and execution of the subsea landing string /well testing & clean up/ slickline, IWOCS integration and main interface with SPS Department for the Drilling and completion activity for a ultra deepwater project
Lieu de travail : Accra, Takoradi and Offshore Ghana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43268 - PSV Senior Technician M/F

Fri, 08 May 2026 22:29:57 Z

Type de contrat : Durée déterminée
Description du poste :
SPIE Services Nigeria Limited is currently looking for a PSV Senior Technician to join its work force in Nigeria. He/She shall be responsible for the safe inspection, testing, maintenance, and certification of all Pressure Safety Valves across upstream, midstream, and downstream facilities in compliance with DPR/NUPRC regulations, API standards, and company HSE policies. You protect lives, assets, and production continuity in a high-risk environment. Key Responsibilities Maintenance & Repair Strip down, clean, lap seats, replace springs, bellows, and O-rings on valves from brands like Crosby, Anderson Greenwood, Leser, and Farris Execute emergency repairs during unplanned shutdowns to avoid flaring penalties Testing & Certification Perform statutory PSV testing and recertification intervals as mandated by NUPRC Guidelines and API 576 - typically every 12-36 months depending on service Conduct bench testing and in-situ testing using deadweight testers and portable pop testers on FPSOs, flow stations, refineries, and gas plants Stamp and issue PSV certification tags acceptable to NUPRC and third-party inspectors HSE & Regulatory Compliance Ensure 100% compliance with DPR Safety Regulations 1997 and NMDPRA requirements Complete Permit to Work (PTW), JSA, and Toolbox Talk documentation before any job

Minimum ND/HND Mechanical Engineering from NBTE-accredited polytechnic. B.Eng preferred for IOC roles API 510 or API 570. BOSIET + HUET for offshore roles. COREN registration is an advantage 8-10 years in oil & gas, with 6 years minimum on PSV maintenance. FPSO/LNG experience is a plus
Lieu de travail : Offshore - Lagos
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43266 - Senior CBM Technician M/F

Fri, 08 May 2026 22:29:55 Z

Type de contrat : Durée indéterminée
Description du poste :
SPIE Services Nigeria Limited is currently looking for Senior CBM Technician to join its work force in Nigeria. KEY RESPONSIBILITY: Rotating Equipment ExpertisePumps, compressors, motors, turbines Bearing and seal maintenance Alignment and balancing techniques Vibration AnalysisData collection and interpretation Use of vibration monitoring tools (e.g., CSI, SKF, Bently Nevada) First-level diagnostics and reporting Infrared ThermographyThermal imaging for electrical and mechanical systems Identifying hotspots, insulation issues, and sand levels in vessels Lubrication & Oil AnalysisOil sampling procedures Understanding of oil properties and contamination indicators Familiarity with oil analysis software and databases Condition Monitoring SystemsPI System (OSIsoft) or similar platforms Real-time data interpretation (temperature, pressure, vibration) Mechanical Maintenance & TroubleshootingHands-on repair and refurbishment (e.g., bearing/motor replacement) Use of hand and power tools Reading mechanical drawings and P&IDs

Minimum of 5 years' experience in the maintenance field on offshore oil and gas installations. Higher National Diploma or Higher qualification in Mechanical/Production Engineering Ability to perform detailed vibration collection and analysis, download the data into the vibration database, realize first level of analysis of results, send a monthly backup to onshore for detailed analysis and follow achievement of Company's approved vibration corrective actions Ability to carry-out and interpret thermography survey, perform daily monitoring of Pump & Turbines condition (temperature, performance, vibration etc.) with the online process data (Pl) and suggest corrective actions to avoid failures Knowledge of Spectrographic (oil analysis).
Lieu de travail : Offshore
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-43265 - HVAC Senior Technician M/F

Fri, 08 May 2026 22:29:53 Z

Type de contrat : Durée déterminée
Description du poste :
SPIE Global Services Energy is looking to strengthen its workforce in Nigeria by recruiting experienced HVAC Senior Technician to join our offshore operations team. Key Responsibility: Maintenance & Repair Service and repair HVAC for control rooms, switchgear rooms etc. Maintain positive pressure systems in control rooms to prevent hydrocarbon gas ingress per IECEx/ATEX standards Overhaul chillers, packaged units, AHUs, and VRF systems in corrosive saltwater environment Standby during drilling and production operations. Installation & Commissioning Install new HVAC systems and oversee piping, ductwork, and electrical connections Commission systems and conduct performance testing before handover to operations Read and interpret mechanical and electrical drawings, P&IDs, and HVAC schematics HSE & Compliance Ensure compliance with NUPRC safety standards, ASHRAE guidelines, and company HSE policies Complete PTW, JSA, and LOTO before working on energized equipment

Experience on offshore oil and gas producing facility, preferable FPSO. Minimum of 8 years' experience in the field of repair of HVAC & Refrigeration systems. Must hold recognized OND or equivalents or have completed a recognized trade apprenticeship or verified technician training scheme with a minimum of working experience. Must be able to work effectively as part of a team.
Lieu de travail : Lagos - offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43264 - Valve Senior Technician M/F

Fri, 08 May 2026 22:29:51 Z

Type de contrat : Durée déterminée
Description du poste :
We are seeking an experienced Valve Technician to join our team for a comprehensive valve greasing campaign during the Shutdown. Key Responsibilities: Valve Maintenance and Greasing Perform routine and preventive maintenance, including greasing, on a wide range of valves such as ball, gate, globe, butterfly, and check valves. Tool and Equipment Management Properly handle and maintain tools and equipment used in valve maintenance.

High school diploma or equivalent. Technical certification in mechanical or industrial maintenance is preferred. Minimum of 6years of experience as a valve technician, preferably in an offshore environment. Proficiency in valve maintenance, repair, and greasing. Familiarity with various valve types and their operating principles. Valid offshore safety and survival certificates (e.g., BOSIET, HUET). Trade certifications related to valve Ability to work in offshore conditions, including climbing, lifting, and working in confined spaces.
Lieu de travail : Offshore - Lagos
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42712 - HEAD OF MECHANICAL MAINTENANCE PREPARATOR - ONSHORE M/F

Thu, 07 May 2026 22:29:44 Z

Type de contrat : Durée indéterminée
Description du poste :
Purpose He checks and ensures that vital equipment on production sites is available as and when required. Qualifications required; The holder of this position must have the following qualifications: ✓ Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), ✓ 5 years of general industrial maintenance ✓ Computer literacy is required, ✓ Ability to work offshore under the climatic conditions of the site, ✓ Ability to work in a multinational team. Ability to work in a service relationship. ✓ Competence/experience in the relevant specialities (mechanical/fitting, handling, tooling, electricity, instruments), ✓ Experience in CMMS ✓ Working language: English Bright 3.5 (or equivalent)

HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity GENERAL DESCRIPTION ✓ Support of offshore operations, ✓ Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) ✓ Check repairs requirement and quality ✓ Short- and medium-term improvement methods MAIN FUNCTIONS ✓ Review preventive maintenance program validity. Check availability of means to complete it as and when required. ✓ Assist the SITE as required for corrective maintenance ✓ Prepare work pack for specific maintenance job when requested ✓ Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required ✓ Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives, ✓ Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS, ✓ Taken vibration measurements on site and analysis for Method Mechanical engineer
Lieu de travail : GIRASSOL FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-43262 - CHEFE DE EQUIPA DE MECANICO* M/F

Thu, 07 May 2026 12:46:18 Z

Type de contrat : Durée déterminée
Description du poste :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Technical Diploma or HND in Mechanical Engineering, Industrial Maintenance, or related discipline. Minimum 8 years’ experience in Oil & Gas mechanical maintenance, including offshore operations. Minimum 3 years in a supervisory or Foreman position. Strong experience with rotating and static equipment including pumps, compressors, gearboxes, turbines, diesel engines, valves, heat exchangers, air coolers, hydraulic systems, and cranes. Good understanding of preventive, corrective, and condition-based maintenance. Ability to read and interpret P&IDs, PFDs, isometric drawings, vendor manuals, and datasheets. Practical knowledge of alignment, flange management, bolting, lubrication, bearing replacement, and mechanical troubleshooting. Familiarity with CMMS systems, preferably SAP PM. Good knowledge of PTW, isolations, gas testing, ATEX requirements, PPE, and offshore HSE procedures. Good supervisory, reporting, and communication skills. Proficient in Microsoft Word and Excel. Ability to work offshore rotational schedules in a multicultural environment.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43114 - PREPARADOR MECÂNICO* M/F

Mon, 27 Apr 2026 07:47:40 Z

Type de contrat : Durée déterminée
Description du poste :
General Description Support of offshore operations, Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) Check repairs requirement and quality Short and medium term improvement methods HSE: Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Operations: Review preventive maintenance program validity. Check availability of means to complete it as and when required. Assist the SITE as required for corrective maintenance Prepare work pack for specific maintenance job when requested Analyze CMMS report for his field of competence and recommend improvement solutions to COMPANY as required Ensures quality of the maintenance operations: preparation of intervention files, work orders, reporting, CMMS

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Working knowledge of SAP for maintenance planning, work order preparation, material requisition, and history tracking. Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in mechanical principles and process parameters (pressure, temperature, flow, density) and their impact on rotating and static equipment performance. Able to read and interpret P&IDs, isometric drawings, GA drawings, equipment datasheets, and vendor documentation. Equipment Knowledge Working knowledge of mechanical installation (filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valve types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Maintenance work preparation know-how Understand maintenance strategies and techniques, including: Preventive and corrective maintenance Alignment, tolerances, and clearances Basic condition monitoring concepts (vibration, temperature, leaks) Be able on a given preventive work order to prepare tools, spare parts and adapt procedure or work instruction. Basic understanding of process control interactions with mechanical systems, including how equipment responds to operational changes (start-up, shutdown, trips). Awareness of safety systems and interfaces with mechanical equipment, including ESD actions, relief systems, and isolation philosophy. Qualifications: Bacharelato em Engenharia Mecânica Has held as a minimum a Mechanical foreman position for up to 5 years in an offshore maintenance setting Computer literacy is required, Ability to work offshore under the climatic conditions of the site, Ability to work in a multinational team. Ability to work in a service relationship. Experience in CMMS
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42814 - Tecnico de Grua* M/F

Tue, 21 Apr 2026 10:39:02 Z

Type de contrat : Durée déterminée
Description du poste :
HSE Complies with and applies the COMPANY’s HSE regulations particularly Permit to Work procedures, approved operating procedures, and standard industry practice during maintenance activities under supervision. Reports unsafe acts, conditions, and near misses to the supervisor. Petroleum: Have a basic understanding of offshore facilities and process systems. Demonstrates awareness of hydrocarbon behavior and associated risks (explosion, asphyxia…). Computer Skills: Able to produce basic report using Microsoft Word Able to perform simple calculations and data entry using Microsoft Excel. Able to use email and internet tools for work purposes. Physics: Understands and applies basic physical laws and units (forces, mass, energy, Newton’s laws). Has basic knowledge of materials and steels, including usage, mechanical resistance, corrosion mechanisms, and prevention methods. Engineering: Able to read and use basic engineering drawings (P&IDs, PFDs, isometrics). Able to interpret vendor documentation, nameplates, datasheets, tolerances, and adjustment figures. Able to produce clear and accurate hand sketches and drawings to scale. Equipment: Understands the working principles of crane‑related mechanical and hydraulic equipment, including:Filters Gear boxes Diesel engines Common valve types (butterfly, gate, ball, PSV) Crane hydraulic systems (crane hydraulic circuits, HPU, hydraulic pumps). Fully familiar with lubrication requirements and different types of lubricants. Familiarized with preventive maintenance tasks and their objectives. Aware of Condition‑Based Maintenance (CBM) techniques such as vibration monitoring and oil analysis, including their purpose and limitations. Maintenance: Understands preventive and corrective maintenance concepts and basic maintenance planning principles. Has basic knowledge of CMMS usage (issue notifications, read and complete work orders). Able to identify and correctly use mechanical measuring tools. Able to identify spare parts and follow appropriate procedures or work instructions.

Angolan national. Technical secondary education or vocational training in Mechanical Maintenance or related discipline. 0 to 3 years of experience in mechanical maintenance or industrial equipment maintenance; oil & gas experience is an advantage. Basic knowledge of diesel engines, hydraulic systems, gearboxes, and lubrication principles. Ability to use basic mechanical tools and follow maintenance procedures under supervision. Strong ability to read drawings and technical documentation. Strong awareness of HSE rules and willingness to comply with offshore safety requirements. Fluent in Portuguese; basic English knowledge required. Basic computer skills (Word, Excel, email). Medically fit and willing to work offshore under rotational schedules. Demonstrates motivation, discipline, and willingness to learn.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42902 - Contrôleur de gestion H/F

Mon, 13 Apr 2026 09:05:19 Z

Type de contrat : Durée déterminée
Description du poste :
Concevoir et piloter des indicateurs de performance (KPI).  Suivre l’évolution des résultats financiers de l’entreprise et évaluer sa performance.  Proposer et mettre en œuvre des mesures correctives si necessaire.  Réaliser le suivi budgétaire et assure les clôtures comptables.  Mettre en place et contrôler les procédures internes.  Proposer des solutions d’optimisation de la rentabilité.  Conseiller l’entreprise en matière de gestion comptable et financière.  Élaborer le reporting vers la maison mère (carnet de commandes, compte de résultat, prévisions glissantes, crédit client, provisions).  Rapporter ses analyses à la Direction de la Filiale et au Siège, en expliquant les écarts constatés.  Participer à l’élaboration et à l’analyse des budgets et re-prévisions annuelles.  Contribuer aux revues d’affaires et aux appels d’offres ponctuels.  Participer à l’amélioration de l’ERP en lien avec la Direction Financière.  Assurer le lien avec les opérationnels pour leur fournir les informations financières nécessaires.  Remettre en place et suivre les procédures de contrôle de gestion local.  Assiste la Direction Financière lors des audits CAC et/ou interne, contrôle des administrations, ...

Formation supérieure en finance, comptabilité, contrôle de gestion ou école de commerce (Bac+3 à Bac+5). Expérience de 2 ans minimum en contrôle de gestion (stages inclus). Connaissance du secteur d’activité de l’entreprise (atout). Anglais professionnel souhaité. Comptabilité générale et analytique. Maîtrise des outils de contrôle de gestion et ERP (ex. IFS). Reporting et analyse financière. Sens de la rigueur et de l’organisation. Esprit de synthèse et d’analyse. Résistance au travail sous pression. Esprit d’initiative et proactivité.
Lieu de travail : Base DPS, Rue Andrée GALLAIS, B.P. 579, Port-Gentil, Gabon
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-42481 - Technicien expérimenté / Chef d'Equipe Machines Tournantes M/F

Sat, 11 Apr 2026 22:24:39 Z

Type de contrat : Contrat international
Description du poste :
coordonner l'équipe de techniciens en charge des activités d’expertise, de démontage, remontage et tests sur les machines tournantes (pompes, compresseurs, réducteurs, etc). Planifier, organiser et contrôler les opérations de maintenance préventive et corrective Suivi technique Garantir la conformité technique des interventions sur pompes, compresseurs et réducteurs selon les standards API 610 / 682 et exigences clients. Contrôler la qualité des interventions mécaniques (alignement, équilibrage, diagnostic) réalisées par ses équipes. Suivre l’état des pièces de rechange / stocks consommables et anticiper les besoins critiques. Réceptionner et contrôler les pièces détachées fournies par les clients et/ou le service Achat. Gestion & reporting Rédiger les rapports techniques après intervention comprenant les informations équipement, les rapports de métrologie / d’équilibrage, les tests de fin d’intervention, les photos, les observations et recommandations. Assurer le reporting auprès du Chef D’Atelier. Assurer la traçabilité documentaire (Rapport, fiche de réception, note d’entrée/sortie).

Expérience Minimum 5 ans d’expérience en maintenance mécanique et en atelier. Expérience confirmée sur machines tournantes (pompes, compresseurs, réducteurs). Expérience en environnement Oil & Gas / Pétrochimie fortement appréciée. Compétences techniques Maîtrise des techniques de maintenance (expertise, démontage, montage, équilibrage, test) des machines tournantes et des garnitures. Maîtrise des tolérances APIs. Maîtrise des outils de mesures, de métrologies, des techniques d’alignements, d’équilibrage et de diagnostic vibratoire. Lecture et interprétation de plans, schémas et spécifications techniques.
Lieu de travail : Luanda, Atelier Pompe
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42869 - Rigger de Grua (Crane Rigger)* M/F

Thu, 09 Apr 2026 08:53:38 Z

Type de contrat : Durée déterminée
Description du poste :
Operations Organises and executes rigging and lifting operations under his responsibility, ensuring safe and efficient execution. Supports planning activities by providing input on resources, lifting requirements, and execution strategies for rigging operations. Responsible to arrange and organize relevant materials and accessories from lay down area to work location. Assists the GMC team during lifting activities to ensure safe and effective execution of maintenance tasks. Ensures full compliance with QHSSE rules, Permit to Work (PTW), and approved lifting procedures. Maintains all rigging equipment, ensuring proper storage, certification, colour coding, and fitness for purpose. Participates in Job Hazard Analyses and Attend safety toolbox meetings on a daily basis with contractors' work teams. Supports control of lifting equipment certification and ensures all uncertified or defective equipment is quarantined. Works closely with Warehouse and Inspection teams for control, handling, and tracking of lifting equipment. Executes any additional tasks within his field of competence as directed by supervision. Planning & Methods Identifies critical or complex lifting operations during preparation stages and ensures appropriate risk assessments and lifting plans are developed. Monitors rigging equipment availability and highlights any shortages or quality issues to planning and support teams. Tracks backlog of rigging activities and proposes corrective actions when required. Identifies recurring lifting issues and recommends improvements to procedures and equipment. Quality Assurance & Control Performs regular site checks to ensure lifting operations are executed in accordance with procedures and standards.

Education & Certification Técnico Médio (Mechanical/Industrial) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified rigging training scheme. Valid (or expired within 1 year) rigging and lifting certification approved by a competent authority. Certification in slinging, lifting operations, and use of lifting accessories is mandatory. Experience Minimum 5–8 years’ experience in rigging and lifting operations within oil & gas or heavy industrial environments. Minimum 2–3 years offshore experience, including lifting operations to/from support vessels. Experience supporting lifting operations for maintenance activities (GMC or similar) is an advantage. Technical Competencies Strong knowledge of rigging practices, lifting equipment, and lifting accessories (slings, shackles, hoists, beams). Ability to interpret lifting plans, load charts, and rigging drawings. Familiar with lifting equipment certification, colour coding systems, and inspection requirements. Understanding of lifting risk assessment and critical lift planning. Maintenance & Systems Experience in inspection, tracking, and control of rigging equipment and lifting accessories. Ability to maintain rigging registers/databases and monitor certification status. Familiarity with warehouse and logistics handling of lifting equipment. HSE & Compliance Good knowledge of QHSSE requirements, Permit to Work (PTW), and lifting safety standards. Strong safety awareness with ability to identify hazards and ensure compliance with lifting procedures. Behavioural Skills Ability to coordinate with Operations, Marine, Inspection, and Logistics teams. Good communication and reporting skills (basic English required). Physically fit and capable of working in offshore conditions.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42841 - QAQC Inspector M/F

Tue, 07 Apr 2026 15:43:40 Z

Type de contrat : Contrat international
Description du poste :
Ø Monitor key performance indicators and quality targets, in coordination with the QMS, identifying improvement opportunities. Ø Follow up and Conduct Internal/external Audit (ISO, API ) when requested Ø Follow up and Conduct Internal /External Audit for Company Qualified Licensee. (Vam,Tenaris , NOV Grand Prideco Ø Verifications of document control as per Licensee procedure and upload to web site Licensee. Ø Follow up and investigate NCR internal and external opening. Ø Traceability of Incoming / outgoing documentation works order Client. Ø Strictly adhere to company’s rules, regulations and code of ethics Ø Share work and perform the inspection to the standard procedure and/or specified by Client request. Ø Review and prepare final report and/or certificate of conformity in a timely manner and assure its immediate dispatch to the Client. Ø Delivery of the W.O. file with all documentation to Finance department for Invoice Process. Ø Weekly report of the Quality department performance. Ø Control and records the use of gauges Ø Ensure gauges used in the shop are calibrated Ø Conduct dimensional and final inspection of tools. Ø Conduct inspection of surface treated (phosphate, cold rolling, and sand blasting) tools as well as give technical advice on surface treatment processes. Ø Ensure identification and traceability of tools and other customer properties. Ø Ensure proper filing and control of approved inspection and tally reports Ø Participate in the identification of nonconforming products Ø Maintain Gauges Control register for calibration update and interface with Logistics department & for Gauge handling to and from Licensors and/or calibration shops. Ø Knowledge of Make-up operations.

Ø License degree or technical Diploma: Electronics, Mechanical Ø Mechanical Background knowledge Ø Computer literate (Microsoft word, excel, power point) Ø Lead Auditor certificate will be an Advantage · Minimum 3/ 5 Years on the same position. ü API Q1 & Q2 knowledge ü ISO 9001 Quality Management System last edition ü OCTG, BHA, Drilling Equipment Inspection. ü Premium Connection Vam, Tenaris , Nov Grand Prideco ü T.H. DS-1 ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA.
Lieu de travail : Luanda, Machine Shop
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42818 - OPERADOR DE GRUA (CRANE OPERATOR)* M/F

Mon, 06 Apr 2026 10:58:10 Z

Type de contrat : Durée déterminée
Description du poste :
Operations Executes lifting operations as directed, including material transfer to/from support vessels, equipment handling, and offloading activities. Operates cranes, winches, forklifts, and other lifting/handling equipment in a safe and efficient manner. Organises and performs rigging and lifting activities under his responsibility, ensuring compliance with approved procedures and lifting plans. Ensures all lifting operations are conducted in accordance with QHSSE requirements, site procedures, and instructions from authorised personnel. Works closely with Logistics and Marine teams to ensure safe and efficient execution of lifting activities. Participates in pre-job risk assessments (JSA) and strictly follows all safety recommendations. Reports all incidents, near misses, and unsafe conditions to supervision and COMPANY. Ensures work areas are left clean and safe after completion of activities. Maintenance & Equipment Performs first-line maintenance and routine inspections on cranes and lifting equipment, reporting any anomalies to the Mechanical Supervisor. Assists in maintenance and minor repairs of lifting devices as required. Supports third-party inspection and certification activities, including use of water bags and load testing equipment. Ensures all lifting tools and equipment are maintained in safe and operational condition. Support Activities Provides assistance in rigging, lifting operations, and general handling activities as required. Supports mechanical team activities during non-lifting periods, as directed by supervision. Methods & Continuous Improvement Reports daily maintenance findings and operational feedback to supervision. Identifies recurrent issues and proposes improvements to procedures and equipment reliability. Ensures proper use of PPE and adherence to all safety procedures at all times.

Education & Certification Técnico Médio (Industrial/Mechanical) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified technician training scheme. Valid or expired (within last 2years) offshore crane operator certification approved by a competent authority (e.g., BS 7121 or equivalent). Valid forklift and lifting equipment operator certifications. Experience Minimum 5 years’ experience in crane and lifting operations within oil & gas or heavy industrial environments. Minimum 3 years’ experience offshore, with proven involvement in:Lifting operations to/from support vessels and marine units Offshore material handling and equipment transfer Execution of lifting activities under Permit to Work (PTW) conditions Demonstrated experience in maintenance and first-line inspection of cranes and lifting equipment. Experience with critical lifting operations and adherence to approved lifting procedures and safety standards. Technical Competencies Strong knowledge of rigging and lifting operations, including lifting plans and safe load handling. Ability to operate cranes, winches, forklifts, and other lifting equipment safely and efficiently. Familiarity with inspection and basic maintenance of lifting equipment and accessories. Understanding of load testing activities (e.g., water bags, load cells) is an advantage. HSE & Compliance Good understanding of lifting safety standards, Permit to Work (PTW), and site procedures. Demonstrates strong safety awareness and adherence to QHSSE requirements at all times. Practical & Behavioural Skills Skilled in handling and operating various lifting and handling equipment. Ability to work effectively in a team and maintain good relationships with colleagues and contractors. Capable of working in offshore conditions and physically fit for site activities. Basic communication and reporting skills (English required).
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle