Export RSS des offres - Seulement les offres à la une : Non / Zone géographique : Afrique / Pays : Afrique-->Nigéria

2026-43141 - Wellsite Subsea Engineers M/F

Tue, 28 Apr 2026 12:40:16 Z

Type de contrat : Interim
Description du poste :
Key Activities: - Manage interfaces between subsea equipment suppliers, SPS department and drilling rig during well operations. - Coordinate and witness subsea equipment SIT, offshore testing and installation activities, when required (i.e. Landing String system, IWOCS, etc.). - Assisting Drilling superintendent on subsea BOP troubleshooting - Reviewing and commenting on technical documentation produced by the contractors (e.g. technical reports, specifications, procedures, drawings, etc.) ensuring the implementation of the established procedures and good engineering practice. - Review configuration of subsea Landing String equipment, such as the Subsea Test Tree (SSTT) space-out inside the BOP, lubricator valve positioning, retainer valves functionality, and surface flow tree. - Act as focal point for the rig contractor and completion, well intervention, and subsea equipment suppliers to finalize the rig layout, optimizing onboard equipment positioning and defining any required rig modifications (e.g., control umbilical routing, surface equipment placement, coiled tubing lifting frame installation, Landing String and XT IWOCS umbilical arrangement).- Follow up offshore operations on the drilling rig for landing string operations and well testing - Follow up offshore operations on the drillship for landing string operations and well testing - Solid knowledge of horizontal X-tree system and subsea completion operations, including tubing hanger installation and crown plug installation/retrieval. - Solid knowledge of IWOCS (Intervention Workover Control System), including but not limited of system set up - Solid knowledge of subsea electro-hydraulic (EH) landing string systems and related completion operations. - Solid knowledge of subsea slickline operations Resolving ongoing technical issues concerning all aspects of subsea equipment. - Proven ability to identify and resolve technical and operational issues related to subsea equipment throughout all project phases. HSE Requirements Comply with requirements of Safety, Health and Environmental laws of the Country. Obey the Company Policy on Safety, Health and Environment and aim at achieving the Company's HSE strategic objectives. Practice Company's HSE Management System. Provide safe and healthy conditions of work to subordinate personnel and control over compliance by the personnel with safe, labor protection rules and regulations. Assure the application of all the relevant HSE procedures and standards in organization and development activities. Ensure, supported by the HSE structure, training and staff development on HSE aspects. Ensure that all contractors are competent and fully knowledgeable of Project HSEQ procedures. Prepare the field development strategy, including preliminary contracting strategy and Project HSE Plan. Supervise the preparation of the risk register and the relevant mitigation strategy to address identified uncertainties and managing the risks. Sup

Subsea Engineer with Baker Hughes IWOCS and Horizontal Xmas Tree experience Purpose: Subsea Completion Engineer will be responsible at wellsite for managing interfaces between subsea equipment and drilling rig, ensuring readiness of documentation and equipment, and supporting testing, installation, and commissioning activities during well operations for an ultra-deep water project. In addition, to support the Drilling and Completion & Development team in the engineering, design, manufacturing, testing and installation of subsea production systems focusing on landing string operations, IWOCS system setup, well testing, slickline and subsea completion operations. To assure that the design meets project requirements, applicable standards and engineering best practices. Main Responsibilities: - Responsible for the planning and execution of the subsea landing string /well testing & clean up/ slickline, IWOCS integration and main interface with SPS Department for the Drilling and completion activity for a ultra deepwater project
Lieu de travail : Accra, Takoradi and Offshore Ghana
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-43114 - PREPARADOR MECÂNICO* M/F

Mon, 27 Apr 2026 07:47:40 Z

Type de contrat : Durée déterminée
Description du poste :
General Description Support of offshore operations, Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) Check repairs requirement and quality Short and medium term improvement methods HSE: Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity Operations: Review preventive maintenance program validity. Check availability of means to complete it as and when required. Assist the SITE as required for corrective maintenance Prepare work pack for specific maintenance job when requested Analyze CMMS report for his field of competence and recommend improvement solutions to COMPANY as required Ensures quality of the maintenance operations: preparation of intervention files, work orders, reporting, CMMS

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Working knowledge of SAP for maintenance planning, work order preparation, material requisition, and history tracking. Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in mechanical principles and process parameters (pressure, temperature, flow, density) and their impact on rotating and static equipment performance. Able to read and interpret P&IDs, isometric drawings, GA drawings, equipment datasheets, and vendor documentation. Equipment Knowledge Working knowledge of mechanical installation (filters, gear boxes, exchangers, air coolers, diesel engine, gas turbines, centrifugal and reciprocating pumps or compressors, common valve types (butterfly, gate, ball, cage and PSV) and hydraulic systems (cranes, HPU, pumps). Maintenance work preparation know-how Understand maintenance strategies and techniques, including: Preventive and corrective maintenance Alignment, tolerances, and clearances Basic condition monitoring concepts (vibration, temperature, leaks) Be able on a given preventive work order to prepare tools, spare parts and adapt procedure or work instruction. Basic understanding of process control interactions with mechanical systems, including how equipment responds to operational changes (start-up, shutdown, trips). Awareness of safety systems and interfaces with mechanical equipment, including ESD actions, relief systems, and isolation philosophy. Qualifications: Bacharelato em Engenharia Mecânica Has held as a minimum a Mechanical foreman position for up to 5 years in an offshore maintenance setting Computer literacy is required, Ability to work offshore under the climatic conditions of the site, Ability to work in a multinational team. Ability to work in a service relationship. Experience in CMMS
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43026 - Contracts & Claims Engineer M/F

Wed, 22 Apr 2026 07:19:33 Z

Type de contrat : Interim
Description du poste :
SPIE Services Nigeria Limited is currently looking for a Contracts & Claims Engineer to join its work force in Nigeria. Responsibilities include: Build EPNG Project Management System Provide support to define the method & tools related to contract management, claims and disputes management. Participate to definition methods for the entity (Contract toolbox, Competence requirement for contract engineers, expertise requirement, evaluation quiz...) Communicate, explain and raise awareness on the methods and tools, and contractual rigorousness. Control the contract management of the portfolio and prepare for Claim Provide guidance in identifying potential change orders and claims. Assist the project in drafting correspondences and notices to Contractors. Analysis and review of existing Claims: provide support to projects for existing Claims and corresponding resolution (contracts execution phase / close out phase), Provide higher understanding and recommendations for building the Claim dossiers / corresponding settlement. Provide expertise to projects When relevant may act as Contract engineer for some designated projects. Coach the contract engineers of the entity and Projects Portfolio (Assistance, advice, training...) Provide dedicated support during CFT or claim negotiation, Tender evaluation… Provide support to the project to build ad Hoc Decision support dossier for Contract Committee or VO approval Help project to navigate within HQ, TGP or the affiliate making sure internal stakeholder are well informed and consulted as required. Improve and learn from experience Contribute continuously to Contracts REX/Lessons Learnt consolidation. For each of the dossier, starting by screening the existing REX and when completing a dossier preparing main lessons learnt to be shared with other contract engineers and to be archived.

QUALIFICATIONS / EXPERIENCE REQUIRED Contract and procurement professional preferably in energy sector Professional Experience (number of years): 20 Experience within project (number of years): 15 Very Good understanding of all aspects of the project: planning, time impact, quantum, costs, risk management, project management, technical, local content… Essential personnel management skills (Teamwork, communication, coordination, delegation).
Lieu de travail : Port Harcourt, Nigeria
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42814 - Tecnico de Grua* M/F

Tue, 21 Apr 2026 10:39:02 Z

Type de contrat : Durée déterminée
Description du poste :
HSE Complies with and applies the COMPANY’s HSE regulations particularly Permit to Work procedures, approved operating procedures, and standard industry practice during maintenance activities under supervision. Reports unsafe acts, conditions, and near misses to the supervisor. Petroleum: Have a basic understanding of offshore facilities and process systems. Demonstrates awareness of hydrocarbon behavior and associated risks (explosion, asphyxia…). Computer Skills: Able to produce basic report using Microsoft Word Able to perform simple calculations and data entry using Microsoft Excel. Able to use email and internet tools for work purposes. Physics: Understands and applies basic physical laws and units (forces, mass, energy, Newton’s laws). Has basic knowledge of materials and steels, including usage, mechanical resistance, corrosion mechanisms, and prevention methods. Engineering: Able to read and use basic engineering drawings (P&IDs, PFDs, isometrics). Able to interpret vendor documentation, nameplates, datasheets, tolerances, and adjustment figures. Able to produce clear and accurate hand sketches and drawings to scale. Equipment: Understands the working principles of crane‑related mechanical and hydraulic equipment, including:Filters Gear boxes Diesel engines Common valve types (butterfly, gate, ball, PSV) Crane hydraulic systems (crane hydraulic circuits, HPU, hydraulic pumps). Fully familiar with lubrication requirements and different types of lubricants. Familiarized with preventive maintenance tasks and their objectives. Aware of Condition‑Based Maintenance (CBM) techniques such as vibration monitoring and oil analysis, including their purpose and limitations. Maintenance: Understands preventive and corrective maintenance concepts and basic maintenance planning principles. Has basic knowledge of CMMS usage (issue notifications, read and complete work orders). Able to identify and correctly use mechanical measuring tools. Able to identify spare parts and follow appropriate procedures or work instructions.

Angolan national. Technical secondary education or vocational training in Mechanical Maintenance or related discipline. 0 to 3 years of experience in mechanical maintenance or industrial equipment maintenance; oil & gas experience is an advantage. Basic knowledge of diesel engines, hydraulic systems, gearboxes, and lubrication principles. Ability to use basic mechanical tools and follow maintenance procedures under supervision. Strong ability to read drawings and technical documentation. Strong awareness of HSE rules and willingness to comply with offshore safety requirements. Fluent in Portuguese; basic English knowledge required. Basic computer skills (Word, Excel, email). Medically fit and willing to work offshore under rotational schedules. Demonstrates motivation, discipline, and willingness to learn.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42902 - Contrôleur de gestion H/F

Mon, 13 Apr 2026 09:05:19 Z

Type de contrat : Durée déterminée
Description du poste :
Concevoir et piloter des indicateurs de performance (KPI).  Suivre l’évolution des résultats financiers de l’entreprise et évaluer sa performance.  Proposer et mettre en œuvre des mesures correctives si necessaire.  Réaliser le suivi budgétaire et assure les clôtures comptables.  Mettre en place et contrôler les procédures internes.  Proposer des solutions d’optimisation de la rentabilité.  Conseiller l’entreprise en matière de gestion comptable et financière.  Élaborer le reporting vers la maison mère (carnet de commandes, compte de résultat, prévisions glissantes, crédit client, provisions).  Rapporter ses analyses à la Direction de la Filiale et au Siège, en expliquant les écarts constatés.  Participer à l’élaboration et à l’analyse des budgets et re-prévisions annuelles.  Contribuer aux revues d’affaires et aux appels d’offres ponctuels.  Participer à l’amélioration de l’ERP en lien avec la Direction Financière.  Assurer le lien avec les opérationnels pour leur fournir les informations financières nécessaires.  Remettre en place et suivre les procédures de contrôle de gestion local.  Assiste la Direction Financière lors des audits CAC et/ou interne, contrôle des administrations, ...

Formation supérieure en finance, comptabilité, contrôle de gestion ou école de commerce (Bac+3 à Bac+5). Expérience de 2 ans minimum en contrôle de gestion (stages inclus). Connaissance du secteur d’activité de l’entreprise (atout). Anglais professionnel souhaité. Comptabilité générale et analytique. Maîtrise des outils de contrôle de gestion et ERP (ex. IFS). Reporting et analyse financière. Sens de la rigueur et de l’organisation. Esprit de synthèse et d’analyse. Résistance au travail sous pression. Esprit d’initiative et proactivité.
Lieu de travail : Base DPS, Rue Andrée GALLAIS, B.P. 579, Port-Gentil, Gabon
Langue / Niveau :
Français : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-42481 - Technicien expérimenté / Chef d'Equipe Machines Tournantes M/F

Sat, 11 Apr 2026 22:24:39 Z

Type de contrat : Contrat international
Description du poste :
coordonner l'équipe de techniciens en charge des activités d’expertise, de démontage, remontage et tests sur les machines tournantes (pompes, compresseurs, réducteurs, etc). Planifier, organiser et contrôler les opérations de maintenance préventive et corrective Suivi technique Garantir la conformité technique des interventions sur pompes, compresseurs et réducteurs selon les standards API 610 / 682 et exigences clients. Contrôler la qualité des interventions mécaniques (alignement, équilibrage, diagnostic) réalisées par ses équipes. Suivre l’état des pièces de rechange / stocks consommables et anticiper les besoins critiques. Réceptionner et contrôler les pièces détachées fournies par les clients et/ou le service Achat. Gestion & reporting Rédiger les rapports techniques après intervention comprenant les informations équipement, les rapports de métrologie / d’équilibrage, les tests de fin d’intervention, les photos, les observations et recommandations. Assurer le reporting auprès du Chef D’Atelier. Assurer la traçabilité documentaire (Rapport, fiche de réception, note d’entrée/sortie).

Expérience Minimum 5 ans d’expérience en maintenance mécanique et en atelier. Expérience confirmée sur machines tournantes (pompes, compresseurs, réducteurs). Expérience en environnement Oil & Gas / Pétrochimie fortement appréciée. Compétences techniques Maîtrise des techniques de maintenance (expertise, démontage, montage, équilibrage, test) des machines tournantes et des garnitures. Maîtrise des tolérances APIs. Maîtrise des outils de mesures, de métrologies, des techniques d’alignements, d’équilibrage et de diagnostic vibratoire. Lecture et interprétation de plans, schémas et spécifications techniques.
Lieu de travail : Luanda, Atelier Pompe
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42869 - Rigger de Grua (Crane Rigger)* M/F

Thu, 09 Apr 2026 08:53:38 Z

Type de contrat : Durée déterminée
Description du poste :
Operations Organises and executes rigging and lifting operations under his responsibility, ensuring safe and efficient execution. Supports planning activities by providing input on resources, lifting requirements, and execution strategies for rigging operations. Responsible to arrange and organize relevant materials and accessories from lay down area to work location. Assists the GMC team during lifting activities to ensure safe and effective execution of maintenance tasks. Ensures full compliance with QHSSE rules, Permit to Work (PTW), and approved lifting procedures. Maintains all rigging equipment, ensuring proper storage, certification, colour coding, and fitness for purpose. Participates in Job Hazard Analyses and Attend safety toolbox meetings on a daily basis with contractors' work teams. Supports control of lifting equipment certification and ensures all uncertified or defective equipment is quarantined. Works closely with Warehouse and Inspection teams for control, handling, and tracking of lifting equipment. Executes any additional tasks within his field of competence as directed by supervision. Planning & Methods Identifies critical or complex lifting operations during preparation stages and ensures appropriate risk assessments and lifting plans are developed. Monitors rigging equipment availability and highlights any shortages or quality issues to planning and support teams. Tracks backlog of rigging activities and proposes corrective actions when required. Identifies recurring lifting issues and recommends improvements to procedures and equipment. Quality Assurance & Control Performs regular site checks to ensure lifting operations are executed in accordance with procedures and standards.

Education & Certification Técnico Médio (Mechanical/Industrial) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified rigging training scheme. Valid (or expired within 1 year) rigging and lifting certification approved by a competent authority. Certification in slinging, lifting operations, and use of lifting accessories is mandatory. Experience Minimum 5–8 years’ experience in rigging and lifting operations within oil & gas or heavy industrial environments. Minimum 2–3 years offshore experience, including lifting operations to/from support vessels. Experience supporting lifting operations for maintenance activities (GMC or similar) is an advantage. Technical Competencies Strong knowledge of rigging practices, lifting equipment, and lifting accessories (slings, shackles, hoists, beams). Ability to interpret lifting plans, load charts, and rigging drawings. Familiar with lifting equipment certification, colour coding systems, and inspection requirements. Understanding of lifting risk assessment and critical lift planning. Maintenance & Systems Experience in inspection, tracking, and control of rigging equipment and lifting accessories. Ability to maintain rigging registers/databases and monitor certification status. Familiarity with warehouse and logistics handling of lifting equipment. HSE & Compliance Good knowledge of QHSSE requirements, Permit to Work (PTW), and lifting safety standards. Strong safety awareness with ability to identify hazards and ensure compliance with lifting procedures. Behavioural Skills Ability to coordinate with Operations, Marine, Inspection, and Logistics teams. Good communication and reporting skills (basic English required). Physically fit and capable of working in offshore conditions.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42841 - QAQC Inspector M/F

Tue, 07 Apr 2026 15:43:40 Z

Type de contrat : Contrat international
Description du poste :
Ø Monitor key performance indicators and quality targets, in coordination with the QMS, identifying improvement opportunities. Ø Follow up and Conduct Internal/external Audit (ISO, API ) when requested Ø Follow up and Conduct Internal /External Audit for Company Qualified Licensee. (Vam,Tenaris , NOV Grand Prideco Ø Verifications of document control as per Licensee procedure and upload to web site Licensee. Ø Follow up and investigate NCR internal and external opening. Ø Traceability of Incoming / outgoing documentation works order Client. Ø Strictly adhere to company’s rules, regulations and code of ethics Ø Share work and perform the inspection to the standard procedure and/or specified by Client request. Ø Review and prepare final report and/or certificate of conformity in a timely manner and assure its immediate dispatch to the Client. Ø Delivery of the W.O. file with all documentation to Finance department for Invoice Process. Ø Weekly report of the Quality department performance. Ø Control and records the use of gauges Ø Ensure gauges used in the shop are calibrated Ø Conduct dimensional and final inspection of tools. Ø Conduct inspection of surface treated (phosphate, cold rolling, and sand blasting) tools as well as give technical advice on surface treatment processes. Ø Ensure identification and traceability of tools and other customer properties. Ø Ensure proper filing and control of approved inspection and tally reports Ø Participate in the identification of nonconforming products Ø Maintain Gauges Control register for calibration update and interface with Logistics department & for Gauge handling to and from Licensors and/or calibration shops. Ø Knowledge of Make-up operations.

Ø License degree or technical Diploma: Electronics, Mechanical Ø Mechanical Background knowledge Ø Computer literate (Microsoft word, excel, power point) Ø Lead Auditor certificate will be an Advantage · Minimum 3/ 5 Years on the same position. ü API Q1 & Q2 knowledge ü ISO 9001 Quality Management System last edition ü OCTG, BHA, Drilling Equipment Inspection. ü Premium Connection Vam, Tenaris , Nov Grand Prideco ü T.H. DS-1 ü Calibration equipment. ü Handling and care of OCTG, Drilling equipment and BHA.
Lieu de travail : Luanda, Machine Shop
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42818 - OPERADOR DE GRUA (CRANE OPERATOR)* M/F

Mon, 06 Apr 2026 10:58:10 Z

Type de contrat : Durée déterminée
Description du poste :
Operations Executes lifting operations as directed, including material transfer to/from support vessels, equipment handling, and offloading activities. Operates cranes, winches, forklifts, and other lifting/handling equipment in a safe and efficient manner. Organises and performs rigging and lifting activities under his responsibility, ensuring compliance with approved procedures and lifting plans. Ensures all lifting operations are conducted in accordance with QHSSE requirements, site procedures, and instructions from authorised personnel. Works closely with Logistics and Marine teams to ensure safe and efficient execution of lifting activities. Participates in pre-job risk assessments (JSA) and strictly follows all safety recommendations. Reports all incidents, near misses, and unsafe conditions to supervision and COMPANY. Ensures work areas are left clean and safe after completion of activities. Maintenance & Equipment Performs first-line maintenance and routine inspections on cranes and lifting equipment, reporting any anomalies to the Mechanical Supervisor. Assists in maintenance and minor repairs of lifting devices as required. Supports third-party inspection and certification activities, including use of water bags and load testing equipment. Ensures all lifting tools and equipment are maintained in safe and operational condition. Support Activities Provides assistance in rigging, lifting operations, and general handling activities as required. Supports mechanical team activities during non-lifting periods, as directed by supervision. Methods & Continuous Improvement Reports daily maintenance findings and operational feedback to supervision. Identifies recurrent issues and proposes improvements to procedures and equipment reliability. Ensures proper use of PPE and adherence to all safety procedures at all times.

Education & Certification Técnico Médio (Industrial/Mechanical) or equivalent technical qualification.Alternatively, completion of a recognised trade apprenticeship or certified technician training scheme. Valid or expired (within last 2years) offshore crane operator certification approved by a competent authority (e.g., BS 7121 or equivalent). Valid forklift and lifting equipment operator certifications. Experience Minimum 5 years’ experience in crane and lifting operations within oil & gas or heavy industrial environments. Minimum 3 years’ experience offshore, with proven involvement in:Lifting operations to/from support vessels and marine units Offshore material handling and equipment transfer Execution of lifting activities under Permit to Work (PTW) conditions Demonstrated experience in maintenance and first-line inspection of cranes and lifting equipment. Experience with critical lifting operations and adherence to approved lifting procedures and safety standards. Technical Competencies Strong knowledge of rigging and lifting operations, including lifting plans and safe load handling. Ability to operate cranes, winches, forklifts, and other lifting equipment safely and efficiently. Familiarity with inspection and basic maintenance of lifting equipment and accessories. Understanding of load testing activities (e.g., water bags, load cells) is an advantage. HSE & Compliance Good understanding of lifting safety standards, Permit to Work (PTW), and site procedures. Demonstrates strong safety awareness and adherence to QHSSE requirements at all times. Practical & Behavioural Skills Skilled in handling and operating various lifting and handling equipment. Ability to work effectively in a team and maintain good relationships with colleagues and contractors. Capable of working in offshore conditions and physically fit for site activities. Basic communication and reporting skills (English required).
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42817 - SUPERVISOR DE TURBINA* M/F

Mon, 06 Apr 2026 10:56:07 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Ensures full compliance with QHSSE rules, Permit to Work (PTW), and site operating procedures during all maintenance activities. Organises, plans, and supervises maintenance and troubleshooting activities on turbine-driven equipment (turbo-generators and turbo-compressors) and associated auxiliary systems. Provides technical support to the preparation and planning team for maintenance activities, including scope definition, resource requirements, and intervention strategies. Leads field teams during interventions, ensuring adherence to procedures, quality standards, and operational priorities. Takes full ownership of turbine systems under his responsibility in case of breakdown, ensuring rapid fault diagnosis, resolution, and restoration to normal operating conditions with minimal production impact. Manages and ensures availability, control, and proper use of specialised tools and equipment required for turbine maintenance. Prepares and validates detailed technical reports, including intervention feedback, failure analysis, and recommendations. Identifies recurrent failures, performs root cause analysis (RCA), and proposes corrective and preventive actions to improve reliability and availability. Interfaces with Operations, Electrical, and Instrumentation teams to ensure integrated system performance and safe restart of equipment. Contributes to achieving technical and maintenance KPIs, including equipment availability, reliability, and reduction of unplanned shutdowns. Specific activities Ensure that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in the OJT / assessment program. Mechanical Specific: Responsible for maintenance and performance of:3 × Turbo-generators (Nuovo Pignone MS5001 gas turbines coupled with GEC Alsthom T500 generators) 3 × Turbo-compressors (Thermodyn RC/RB)

Qualification: Minimum qualification level required is Licenciatura or Técnico Médio in Mechanical Engineering Theoretical Knowledge Strong understanding of oil & gas processes and production systems, including hydrocarbon risks. Good foundation in rotating equipment principles, including gas turbines, compressors, and generators. Ability to read and interpret P&IDs, mechanical drawings, and vendor documentation. Understanding of control and protection systems (ESD, alarms, trips, interlocks). Equipment Knowledge In-depth knowledge of turbine-driven equipment: turbo-generators and turbo-compressors, including auxiliaries (lube oil, fuel gas, seal gas, cooling systems). Familiar with vibration monitoring and condition monitoring systems. Understanding of mechanical and control interfaces with electrical and instrumentation systems. Maintenance & Systems Strong experience in preventive, corrective, and predictive maintenance of rotating equipment. Working knowledge of CMMS (e.g., SAP PM): planning inputs, execution follow-up, and reporting. Ability to support job preparation, including scope definition, tools, spares, and procedures. Practical & Supervisory Skills Proven ability to organise, supervise, and coordinate field teams during maintenance and troubleshooting activities. Strong fault diagnosis capability and ownership of breakdown situations until full restoration. Effective use of specialised tools and alignment, inspection, and testing equipment. Maintenance Know-How Ability to troubleshoot and maintain turbine systems and driven equipment (generators and compressors). Capable of analysing failures, identifying recurring issues, and proposing corrective actions (RCA mindset). Ensures safe restart and operational readiness of equipment after intervention. HSE & Compliance Ensures strict adherence to PTW, LOTO, and site QHSSE procedures. Promotes safe working practices and compliance with industry standards.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42816 - CHEFE DE EQUIPA DE INSTRUMENTACAO* M/F

Mon, 06 Apr 2026 10:55:00 Z

Type de contrat : Durée déterminée
Description du poste :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Proficient in basic computer use (Word, Excel, email, internet). Strong foundation in process physics (temperature, pressure, volume, density, specific gravity). Able to read and interpret P&IDs, loop diagrams, ESD matrices, datasheets, and vendor documentation. Understanding of control and regulation principles (simple, cascade, split range) and basic logic (AND/OR). Familiar with PCS, F&G, and ESD systems, including alarms, trips, and inhibits. Equipment Knowledge Good understanding of instrumentation: pressure, temperature, level, flow and interface measurement devices. Knowledge of metering systems (orifice, coriolis, turbine). Understanding of pneumatic, hydraulic, and basic electrical systems (SOVs, relays, timers). Familiar with control valves, positioners, and PSV principles. Knowledge of Fire & Gas detection systems (flame, gas, smoke). Maintenance & Systems Understanding of preventive, corrective, and predictive maintenance concepts. Basic CMMS knowledge: creating notifications, reading and completing work orders, identifying tools, spares, and procedures for maintenance tasks. Practical Skills Competent in use of hand tools and workshop equipment. Skilled in tubing, fittings, gaskets, seals, and cable terminations. Proficient in use of test and calibration tools: multimeters, calibrators, deadweight testers, temperature baths, hydraulic pumps. Maintenance Know-How Able to perform loop checks from field devices to control systems (PCS/ESD). Capable of calibration, testing, installation, and troubleshooting of transmitters (pressure, level, temperature, flow). Able to calibrate and maintain control valves and positioners. Experience in testing and maintaining Fire & Gas detection systems, ensuring proper inhibit management.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42815 - CHEFE DE EQUIPA DE ELECTRICIDADE* M/F

Mon, 06 Apr 2026 10:53:50 Z

Type de contrat : Durée déterminée
Description du poste :
Operations: Organises and performs on site the maintenance operations which are placed under his responsibility, Ensures strict compliance with COMPANY HSE policies, including adherence to Permit to Work (PTW) procedures, isolation standards, and approved operating procedures. Leads and coordinates field technicians during maintenance and troubleshooting activities, ensuring work is executed safely, efficiently, and in accordance with industry best practices. Enters intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Prepares detailed technical reports, including failure analysis, root cause identification, and corrective/preventive recommendations. Carries out, at the Supervisor request, any intervention within his field of competence. Performs advanced fault diagnosis and takes in charge the systems under his responsibility in case of breakdown, ensuring timely restoration to normal operating conditions.

Theoretical Knowledge Basic understanding of oil & gas facilities and processes (well to export), including hydrocarbon risks (explosion, asphyxiation). Proficient in basic computer use (Word, Excel, email, internet). Solid foundation in electrical physics: resistance, inductance, AC/DC systems, voltage levels, frequency, active/reactive power. Able to read and interpret electrical drawings (single-line diagrams, schematics), nameplates, and symbols. Knowledge of cable sizing, voltage drop, and general electrical network philosophy (generation, emergency power, switchboards, UPS). Understanding of load shedding/sharing, interlocking, and inter-tripping systems. Basic knowledge of cathodic protection and PLC logic (AND/OR, timers, alarms, trips). Familiar with electrical protection systems (short circuit, overload, earth fault, reverse power). Understanding of earthing systems (IT, TT, TN). Knowledge of main electrical equipment and maintenance principles: motors, transformers, alternators, UPS, batteries, switchboards, soft starters, and protection devices. Awareness of condition-based maintenance (e.g., thermography). Maintenance & Systems Understanding of preventive, corrective, and predictive maintenance concepts. Basic CMMS knowledge: creating notifications, reading and completing work orders, identifying tools, spares, and procedures for maintenance tasks. Practical Skills Competent in the safe use of electrical hand tools (including insulated tools). Familiar with cable installation practices: laying, glanding, termination, tagging, and routing (trenches, trays). Proficient in using electrical test equipment: multimeters, clamp meters, insulation testers (megger), earth testers. Maintenance Know-How Able to troubleshoot and maintain small electrical systems (lighting, heat tracing). Capable of cable identification, termination, and installation. Performs preventive maintenance on electrical equipment (motors, transformers, breakers, batteries, switchboards). Able to test alarms, trips, interlocks, and perform insulation/continuity tests. Capable of dismantling, repairing, reassembling, and testing LV electrical equipment.
Lieu de travail : Offshore Block 3/05
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42796 - Shutdown Valves Specialist M/F

Thu, 02 Apr 2026 13:27:43 Z

Type de contrat : Contrat international
Description du poste :
The role is to ensure the preparation, coordination, and follow-up of valves maintenance activities during shutdowns and maintenance operations. Key Responsibilities Work Preparation Identify and analyze the scope of valves to be handled Prepare detailed work packs, including: work procedures method statements spare parts requirements specific tools and equipment Define required resources (workforce, skills, equipment) Valve Scope Management Manage different types of valves: manual valves motor-operated valves (MOV) safety valves (PSV, ESD valves) Planning & Coordination: Work closely with shutdown planning team Integrate valve activities into the overall shutdown schedule HSE, Risk & Lifting Integrate HSE requirements into all preparation activities Identify risks related to valve interventions (pressure, fluids, gas exposure) Define appropriate mitigation measures Integrate lifting activities into work packs: load identification selection of lifting equipment coordination with lifting teams Ensure compliance with lifting and safety standards Execution Support & Follow-up Provide technical support during execution Manage field deviations and update work packs when required Monitor progress of valve activities Participate in lessons learned and feedback processes

• 3 to 5 years of experience in industrial maintenance • Proven experience in valve maintenance • Experience in shutdown / Oil & Gas environment • Ability to read technical documentation: o P&IDs o isometric drawings o datasheets • Solid understanding of lifting operations (lifting & rigging): o basic lifting plan interpretation o risk identification o coordination with lifting teams
Lieu de travail : LAGOS - Client's office
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42752 - Senior Shutdown Planner M/F

Wed, 01 Apr 2026 14:58:15 Z

Type de contrat : Contrat international
Description du poste :
For a Major IOC, we are looking for a Senior Shutdown Planner to lead the planning and optimization of critical turnaround and shutdown activities. Role Objective To deliver integrated, reliable and optimized shutdown planning ensuring: safe execution of all activities adherence to schedule commitments control of project costs efficient utilization of resources (workforce & materials) Key Responsibilities: HSE & Risk Management Integrate HSE requirements into all planning activities Contribute to risk assessments (HAZID, SIMOPS, etc.) Anticipate and mitigate risks related to co-activities and operational constraints Ensure compliance with Oil & Gas standards and company procedures Planning & Scheduling Develop and maintain detailed schedules using Primavera P6 (mandatory) Build structured schedules (WBS, logic, constraints, dependencies) Identify and manage the Critical Path Ensure overall schedule integrity across multiple disciplines Advanced Planning & Optimization Analyze and optimize POB (Peak of Workforce) to ensure balanced resource allocation Identify and resolve schedule clashes (SIMOPS conflicts, technical interferences, access constraints) Perform what-if scenario analysis and resource leveling Optimize execution sequences to reduce downtime and operational risks Coordination & Interfaces Interface with key stakeholders such as Maintenance, Operations, HSE, Engineering, Contractors Participate in and lead pre-shutdown planning and review meetings Ensure alignment across all disciplines and stakeholders

• Minimum 5 years of experience in industrial environments • Proven experience in shutdown / turnaround planning • Strong background in Oil & Gas or heavy industry • Experience in complex, multi-disciplinary project environments • Strong leadership and coordination skills • Excellent communication and stakeholder management • Ability to perform under pressure in critical environments
Lieu de travail : LAGOS - Client's Office
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42728 - ONSHORE - Method Electrical Engineer M/F

Tue, 31 Mar 2026 07:40:48 Z

Type de contrat : Contrat international
Description du poste :
Key Words : Electrical Methods Engineer / Methods Engineer / Maintenance strategies / Management / CMMS / Offshore support / Spare parts optimization / Work procedures / job preparation / Preventive / corrective maintenance / Vendor coordination / Reliability / REX / lessons learne Specific professional knowledge: CMIMS : SAP/R3 PM Context and missions : Rotation Status Position onshore in the offices of COMPANY, Temporary Missions to the FPSO He ensures that maintenance and operational activities are planned and executed using optimized, safe, and standardized technical methods, improving reliability, cost control, and operational performance. Provides direct input into COMPANY longer term planning for Maintenance activities. Reports Directly to COMPANY Maintenance & Inspection Engineer Main activities: Provide technical support for offshore electrical operations / maintenance activities. Develop, apply, and monitor electrical methods and procedures. Daily follow-up of GMC electrical activities and performance. Coordinate and follow up onshore electrical repairs. Optimize electrical spare parts stock and identify new critical spares. Coordinate and support vendors mobilization within his perimeter. Contribute actively to knowledge capitalization and REX (lessons learned) QUALITY ASSURANCE : Verifies the quality of the planning by frequent checks of specialist/supervisor reports in CMIMS, Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload Ensures that all CMIMS reports and Maintenance and Inspection performance reports are accurate

Profile : The holder of this post must have the following qualifications: Chartered Engineer (A-levels + 5 years’ study) or Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent 5 to 10 years’ experience in the Planning of maintenance activities on oil and gas production installations A high level knowledge of CMIMS (UNISUP) or Similar SAP packages. A good knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations. Specific professional knowledge: Pride in his work, ability to maintain good relations with colleagues and others, Physical ability to work temporarily on offshore installations and in the climatic conditions of the site, Languages: English necessary - score of >> 3.5 in standard Total test or Bright test or 780 in TOEIC, French an advantage Perfectly competent and independent in his field, he must show common sense and organizational ability.
Lieu de travail : Luanda
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42712 - HEAD OF MECHANICAL MAINTENANCE PREPARATOR - ONSHORE M/F

Mon, 30 Mar 2026 12:10:50 Z

Type de contrat : Durée indéterminée
Description du poste :
Purpose He checks and ensures that vital equipment on production sites is available as and when required. Qualifications required; The holder of this position must have the following qualifications: ✓ Equivalent of DUT/BTS (French), B.Sc. Mechanical/Instrumentation/Electrical Engineering (2.1), ✓ 5 years of general industrial maintenance ✓ Computer literacy is required, ✓ Ability to work offshore under the climatic conditions of the site, ✓ Ability to work in a multinational team. Ability to work in a service relationship. ✓ Competence/experience in the relevant specialities (mechanical/fitting, handling, tooling, electricity, instruments), ✓ Experience in CMMS ✓ Working language: English Bright 3.5 (or equivalent)

HSE ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity GENERAL DESCRIPTION ✓ Support of offshore operations, ✓ Facilitate maintenance activities of the SITE team through adequate preparation (spare parts verification etc…) ✓ Check repairs requirement and quality ✓ Short- and medium-term improvement methods MAIN FUNCTIONS ✓ Review preventive maintenance program validity. Check availability of means to complete it as and when required. ✓ Assist the SITE as required for corrective maintenance ✓ Prepare work pack for specific maintenance job when requested ✓ Analyse CMMS report for his field of competence and recommend improvement solutions to COMPANY as required ✓ Set up and implement technical procedures, follow-up and update maintenance procedure in relation with COMPANY representatives, ✓ Ensures quality of the maintenance operations : preparation of intervention files, work orders, reporting, CMMS, ✓ Taken vibration measurements on site and analysis for Method Mechanical engineer
Lieu de travail : GIRASSOL FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-42676 - MECHANICAL SUPERVISOR M/F

Thu, 26 Mar 2026 16:18:24 Z

Type de contrat : Interim
Description du poste :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity ✓ Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); ✓ Performs the updating of technical documentation; ✓ Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; ✓ Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause ✓ Failure Analyses, Process Incidents audits and other activities as required; ✓ Operates in conformity with mechanical codes, standards, regulations and industry best practices (ASME, API,ANSI, and ✓ OSHA); ✓ Checks and verifies that mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out; ✓ Participate to safety talk before and after intervention ✓ Participates to key procedure audits in proactive manner; ✓ Respects the waste management policy in force on site, verifying that all activities performed under his own responsibility, comply it, without any exceptions; Operations ✓ Organises on site the maintenance operations which are placed under his responsibility, ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the CSR request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status.

Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures. Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Lieu de travail : GIRASSOL FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire

2026-42657 - OFFSHORE -Mechanical Supervisor M/F

Wed, 25 Mar 2026 13:24:36 Z

Type de contrat : Contrat international
Description du poste :
Key Words : Maintenance / Mechanical / Supervisor / SAP / Rotating / Troubleshooting Planning / Management / CMIMS / Coordination / Meeting / Reporting Main activities: Respect and apply QHSSE rules and procedures Organizes on site the maintenance operations which are placed under his responsibility, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Maintains all mechanical equipment (Gearboxes, Pumps, Compressors, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters). Knowledge of Pumps (Centrifugal, Diaphragm, Piston, Gear, Peristaltic, Dosing, Lubrication pumps), Compressors (Piston, Scroll, Screw, Centrifugal, Vane compressors). Troubleshooting and repairing malfunctions in mechanical systems, Air compressors, Gas lift compressor, Water injection systems, Cranes, pumps, etc. Reading and interpreting drawings, blueprints, and schematics. Asset Care routine to ensure PM/CM close-out and Integrity of Asset maintained. Troubleshooting mechanical issues using appropriate testing devices. Organize for all maintenance activities (Repairing and replacing equipment, electrical wiring, and fixtures). Daily parameter logging, and records. Methods Provide support in repair, installation, and commissioning Analyses indicators provided by the CMMS, stock management and intervention reports with a view to improving maintenance in his area (HSE, availability, preservation of equipment, optimisation of costs), Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance In addition to audits and reviews as above mentioned he participates in periodic meetings with GMC and SMC to ensure proper surveillance. Also, designs, follows-up and optimizes maintenance concepts in close cooperation with the GMCs and SMCs.

The holder of this post must have the following qualifications: Higher National Diploma or Bachelor Degree in Mechanical Engineering (HND/HNC (A-levels + 3 years’ study) 10 to 15 years’ experience in the field of maintenance on oil and gas production installations, Strong offshore maintenance experience
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42656 - OFFSHORE -Mechanical Specialist M/F

Wed, 25 Mar 2026 13:06:11 Z

Type de contrat : Durée déterminée
Description du poste :
Key Words : Maintenance / Mechanical / Supervisor / Methods / SAP / CMIMS / Troubleshooting / Planning / Management / Coordination / Meeting / Reporting Specific professional knowledge: CMIMS : SAP PM Main activities: Organizes on site the maintenance operations which are placed under his responsibility, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manage the maintenance all mechanical equipment (Gearboxes, Pumps, Compressors, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters). Troubleshooting and repairing malfunctions in mechanical systems, Air compressors, Gas lift compressor, Water injection systems, Cranes, pumps, etc. Reading and interpreting drawings, blueprints, and schematics. Asset Care routine to ensure PM/CM close-out and Integrity of Asset maintained. Methods Provide support in repair, installation, and commissioning Analyses indicators provided by the CMMS, stock management and intervention reports with a view to improving maintenance in his area (HSE, availability, preservation of equipment, optimization of costs), Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance In addition to audits and reviews as above mentioned he participates in periodic meetings with GMC and SMC to ensure proper surveillance. Also, designs, follows-up and optimizes maintenance concepts in close cooperation with the GMCs and SMCs.

The holder of this position must have the following qualifications: Higher National Diploma or Bachelor Degree in Mechanical Engineering (HND/HNC (A-levels + 3 years’ study), +10 years’ experience minimum in the maintenance field on oil and gas production installations, Good knowledge of Gearboxes, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters, Pumps (Centrifugal, Diaphragm, Piston, Gear, Peristaltic, Dosing, Lubrication pumps), Compressors (Piston, Scroll, Screw, Centrifugal, Vane compressors) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Bright 3.5 (or equivalent) Fluent in English, knowledge of French & Portuguese language recommended Leadership, reliability and work confidentiality.
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-42653 - INSTRUMENTATION SUPERVISOR M/F

Wed, 25 Mar 2026 10:28:38 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE ✓ Ensures HSE policy fulfillment during his activities ✓ Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules ✓ Is responsible to ensures compliance with HSE (occupational and process) Legislation, Company Standards and Procedures under his area of responsibility to ensure employees safety, legislative compliance and responsible environment attitude ✓ Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity ✓ Contributes to achieve and improve HSE targets, respecting the existing procedures and advising new specific ones (if required); ✓ Performs the updating of technical documentation; ✓ Gives his contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions; ✓ Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Invest Operations ✓ Organises on site the maintenance operations which are placed under his responsibility, ✓ Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. ✓ With his teams assists specialists working under Specific Maintenance Contracts (SMC), ✓ Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, ✓ Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, ✓ Monitors the functioning of utilities and equipment placed under his responsibility, ✓ Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, ✓ Carries out, at the CSR request, any intervention within his field of competence. ✓ Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Methods ✓ Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, ✓ Keeps a critical eye on current preventive maintenance programmes and, if need be, suggests improvements, ✓ Warns support teams of any recurring problems related to the availability or quality of spare parts, ✓ Suggests improvements and requests modifications. Quality Assurance ✓ Verifies the quality of his teams’ interventions by frequent on-site checks, ✓ Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

Purpose ✓ He is responsible for maintenance operations within his field of competence. ✓ He ensures that maintenance operations under his responsibility are carried out in strict accordance with COMPANY’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by CONTRACTOR. ✓ He guarantees a good level of availability of the equipment he is responsible for on production sites. ✓ He plays a predominant role in the transfer of skills to personnel undergoing training by mentoring on site. Qualifications required: The holder of this position must have the following qualifications: ✓ Higher National Diploma or Certificate (HND/HNC (A-levels + 3 years’ study) or BTS/DUT or equivalent, ✓ 5 to 10 years’ experience in the maintenance field on oil and gas production installations, ✓ A basic knowledge of the process of oil and gas treatment, installations and a thorough knowledge of the equipment used in oil and gas treatment installations ✓ Specific professional knowledge: SAP/R3 experience and know-how ✓ Ability to lead and motivate multi-national teams, ✓ Pride in his work, ability to maintain good relations with colleagues and others, ✓ Physical ability to work on offshore installations in the climatic conditions of the site, ✓ Working language: English Bright 3.5 (or equivalent) He must have a proven sense of responsibility
Lieu de travail : DALIA FPSO
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : B-Maitrise professionnelle élémentaire