Export RSS des offres - Seulement les offres à la une : Non / Pays : Afrique-->Angola, Asie-->Indonésie, Afrique-->Gabon, Asie-->Thailande / Entité : SPIE Global Services Energy

2026-45125 - Engineering Support (Commissioning/Process Engineer)

Mon, 26 Oct 2026 03:00:11 Z

Type de contrat : Durée déterminée
Description du poste :
1. Develop and review commissioning, start-up, and operational procedures to ensure safe and efficient system handover. 2. Plan, coordinate, and execute pre-commissioning, commissioning, start-up, performance testing, and handover activities. 3. Provide process engineering support, including process design review, operating philosophy development, and system optimization. 4. Coordinate with engineering, construction, operations, and contractor teams to ensure commissioning readiness and successful project execution. 5. Verify process systems, equipment, and control philosophies comply with design specifications, operational requirements, and safety standards. 6. Support process simulations, troubleshooting, root cause analysis, and resolution of technical issues during commissioning and start-up. 7. Review PFDs, P&IDs, cause & effect diagrams, operating manuals, and commissioning documentation to ensure technical completeness and operability. 8. Monitor commissioning and process performance, identify risks or gaps, and recommend corrective actions to achieve project objectives. 9. Ensure compliance with HSE requirements, company standards, and applicable industry codes and regulations. 10. Support operator training, operations readiness activities, and knowledge transfer to operations and maintenance teams. 11. Prepare and maintain commissioning reports, test records, punch lists, and system handover documentation. 12. Provide technical leadership and guidance to commissioning personnel and project stakeholders throughout project execution and start-up.

-Having valid Indonesia ID - Having the minimum 5-10 years of working experience for Oil and Gas industries for the sampe position - Having the experience of working at LNG - Having the knowledge and understanding of Maintenance and Integrity build -Having the experience at the same position for the last 5 years - Have a good plan, coordinate, and execute pre-commissioning, commissioning, start-up, performance testing, and handover activities.
Lieu de travail : Papua, Indonesia
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-45124 - Operation Readiness Manager M/F

Mon, 26 Oct 2026 02:53:47 Z

Type de contrat : Durée déterminée
Description du poste :
1. Lead and coordinate Operations Readiness activities to ensure operational and maintenance requirements are delivered in line with project objectives and schedules. Serve as the primary interface between Project, Operations, Maintenance, Commissioning, and Start-up teams. Manage the development and implementation of operational procedures, maintenance strategies, integrity programs, spare parts planning, and training requirements. Support commissioning, start-up, and operational handover activities to ensure a safe and efficient transition from project execution to operations. Ensure operational requirements are integrated throughout engineering, procurement, construction, commissioning, and start-up phases. Monitor readiness progress, identify risks and gaps, and implement corrective actions to achieve project milestones. Coordinate stakeholder engagement and facilitate alignment between project and operational teams. Ensure compliance with project requirements, company standards, and applicable HSE and regulatory requirements. Provide leadership and guidance to support successful operational integration and sustainable asset operation.

-Having valid Indonesia ID - Having the 15 years of working experience for Oil and Gas industries (Not necessary to be in owner side experience.) - Having the experience of working as EPC contractor - Having the knowledge and understanding of Maintenance and Integrity build -Having the experience at the same position for the last 10 years - Understand procedure deployment, start-up assistance, spares parts, maintenance and integrity build, training & operation integration
Lieu de travail : Papua, Indonesia
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-45121 - Rotating Mechanical Engineer M/F

Fri, 23 Oct 2026 07:05:03 Z

Type de contrat : Contrat international
Description du poste :
HSE Proposition of any modification to improve HSE parameters. Contribution to the reporting of anomalies and incidents and participation in diagnosis and corrective actions. 2. Supervision and Training Preparation of a training program for the trainees engineers in the frame of the identified needs and in accordance with recognized methods and strategies. Training based on Job examples and directly in contact with the maintenance of the FPSO. Evaluation of the trainees performances in Mechanics. 3. Mechanical Tasks Control of the maintenance plan of installed equipment for mechanical trade. Contribution in the daily reporting of the mechanical activities (including Performance Indicators). Apply of the maintenance plan as defined by the COMPANY Maintenance Leader. Analysis, trouble shoot and reporting after main failures or dysfunctioning of equipment. Organisation and management of relevant actions plan. Follow up of site activities relative to Vendors, Suppliers or Specialists venues, especially in term of preparation and management of the works. Validation for mechanical activities of the works carried out by subcontractors before FPSO expediting. Documentation follow-ups in the SERVICE trade. 4. Contractor Supervision Evaluation of the competency and the performances of the contractors in Mechanical activities. Audit of or contractors as necessary based on the KPIs. Supervision of the management of spare parts for mechanical equipment according to pre defined strategy. Supervision of the preparation of the scheduled overhaul/upgrade. Verification of the strict follow up of the maintenance strategy approved. 5. Optimisation and Development Proposition of improvement in mechanical maintenance strategy based on Site requests and needs. Contribution in his technical area to the integration of the future Block 17 developments. Participation to audits. 6. Management Provide relevant REX to the Mechanical trade (head office). Contribution to the integration of future DB17 development. Reporting of Mechanical activities. Resident or 8*3 rotation

Key requirements: Mechanical maintenance: Good knowledge of mechanical equipment and preventive and corrective maintenance strategies. Maintenance methods and planning: Ability to develop, implement, and optimize maintenance plans and prepare major overhauls. Failure analysis: Ability to troubleshoot equipment failures, identify root causes, and implement corrective actions. Contractor supervision: Experience supervising subcontractors, vendors, and specialist interventions. Spare parts management: Ability to monitor spare parts and ensure their availability for maintenance activities. Continuous improvement: Ability to propose improvements to maintenance strategies and participate in technical audits. Reporting: Experience monitoring KPIs, preparing activity reports, and sharing lessons learned (REX).
Lieu de travail : Luanda (Angola) B17
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-45052 - PLC Supervisor* M/F

Fri, 16 Oct 2026 06:53:29 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Maintain, operate, modify and perform routine tasks on the PLCs, HMIs, automation computers and Unit Control Panels (UCP) Carry out modifications on both hardware (input, output, communication cards etc) and software (control and safety logic, sequence logic etc) of all systems (compressors, pumps, oil & gas metering system, High Integrity Pressure Protection System (HIPPS), Tank Gauging System (TGS), Power Distribution Control System (PDCS), Telemetry System, machine monitoring system etc), under his responsibility as may be required, requested or directed by COMPANY. Prepare with the Control System Specialist, preventive and corrective actions and modifications of the systems under his responsibility. Manage and document in technical reports, interventions using the CMIMS and work packs provided by the planning team. Follow up the parameter values and alarms in the concerned systems under his responsibility and perform trouble shooting if required. Control and apply inhibits in the systems as directed and controlled by COMPANY rules and procedures. Maintain an accurate and auditable log of all system faults and inhibits (Short term and long term). Identify, in the preparatory stage of maintenance works, any sensitive operation and ensure that a proper assessment of the risks involved is carried out beforehand, Identify recurrent corrective maintenance interventions, analyse them and suggest improvements, as well as problems related to availability, quality and obsolescence of spare parts. Track any backlog of work in area of responsibility and suggest corrective measures to COMPANY and CONTRACTOR to improve the management of the backlog. Review and assure that all Software Modifications and corrective actions are validated by COMPANY and all impacted documentations are updated after implementation. Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, 10+ years’ experience in the field of control system and at least 3 years as PLC Supervisor in Oil and Gas / Petrochemical industry, English fluency mandatory, knowledge of French & Portuguese language recommended Specific Knowledge: Advanced skill in PLC´s - SIEMENS (S5 an added advantage) & Yokogawa Industrial Automation Systems, Panels and HMI´s. Advantage if experienced in Emerson Delta V, Rockwell/Allen-Bradley, Emerson Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45051 - CMMS Planner* M/F

Fri, 16 Oct 2026 06:52:08 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Prepares on site the maintenance and inspection operations within CMIMS (SAP) Plans maintenance and inspection operations (routine and short-term) taking into account the spare parts and resourcesReview of Notifications and Attribution of the Trade Attribution of operation to Long term and short term planning Review of the Operations priorities Creating work orders Identification of Work orders with revision code Follow-up of the planning of work orders short term and preventive maintenance Follow-up of parts orders for Short term Work orders Plans Short term corrective Work orders and Preventve maintenance Work orders Coordinate maintenance operations managed by GMC:Make sure that material requested by onshore fit with site material (if necessary request to update the BOM) Check availability of spare parts with Preparators assitance for the one which are stored onshore Dispatch preparation work between onshore and offshore (PTW, spare parts, lifting,etc...) and ensure the follow up. Gather the preparation works to ensure correct execution and follow up. Follow-up material delivery onsite and inform onshore and supervisors Follow-up of reporting into SAP by supervisors by continuous reminders and support in the reporting activities Check and comments activities prepared onshore by preparation team including PTW and reverts with comments if necessary Integrate PTW prepared offshore into the site planning by participating to PTW meeting for submission and recovery of permits Assist preparation team in clarification of notifications for activities to be prepared urgently onshore Follow closely Critical maintenance activities In collaboration with the Trade Supervisor, he prepares interventions Takes part in daily, weekly and coordination meetings on site Ensures the Accurate and timely closeout of all CMIMS Work Orders and ensures accurate and adequate history in the activity reports. Keeps track of any backlog of work in his area of responsibility and suggests corrective measures to the CSR if this backlog threatens to become unmanageable, Quality Assurance: Verifies the quality of his planning by frequent checks of supervisor reports in CMMS Ensures all work loadings per discipline are balanced and achievable and highlights immediately to COMPANY any workload which is unachievable with the resources provided onboard. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering or equivalent degree, +5 to 10 years’ experience in the Planning of maintenance activities on oil and gas production installations, Fully conversant with SAP/R3 Fully conversant with PRIMAVERA P6 English fluency mandatory, knowledge of French & Portuguese language recommended Ability to Coach, Mentor and advise, motivate multi-national teams Pride in his work, ability to maintain good relations with colleagues and others, Highly Proactive individual Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45045 - CBM Supervisor* M/F

Thu, 15 Oct 2026 08:00:04 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Contributes to the building of Methods and Support activities within the Maintenance entity. Carries out CBM vibration surveys on site and issues reports accordingly. Follows up with site to ensure that all actions arising from the CBM Surveys are promptly closed Carries out Lube Oil sampling as per the planning, performs laboratory analysis of the samples as required and issues reports accordingly. Advises site on the outcome of the Lube Oil analysis and the actions required to be carried out to ensure equipment availability. Reviews and advises and follows up on the acceptable process for Lube Oil management on site. Carries out gas leak investigation/surveys on sites and makes estimates of the leakage rates of valves. Also, develops the action plan to close out the leaks on the concerned valves. Assists in vibration analyses and other analyses including all methods related activites as required. Maintains close liaison with the RCM Specialist and Maintenance Discipline Methods Engineers to monitor and follow up actions arising from the results of CBM measurement campaigns. Follows up with site on all the corrective actions recommended following analyses to ensure that they are properly implemented. Visits site whenever the need arises and physically assists to carry out specialized activities following from CBM results (balancing, alignment, rotor axial position adjustment, proximiter gaps setting, etc.…) Issues regular CBM reports as considered necessary to show the health status of big machinery and to highlight pending problems. Takes the ownership on all CBM tools on sites and at base, and acts to ensure their proper usage and safekeeping. Carries out infra-red thermography campaigns on electrical switchboards and ensures the timely execution and report interpretation. Follows up with site on the corrective actions arising therefrom. Follows up the Condition Based Monitoring of electrical motors, collects and reviews data, and liaises with the RCM Specialist and Maintenance Discipline Methods Engineer to engage responsible Contractors for the interpretation of results and recommendation of solutions to equipment issues. Carries out borroscope inspection on turbogenerators when required and issues reports. Follow up SAP Work Orders to ensure proper preparation, close out and reporting on all CBM related actitives on site Assists in any other way considered necessary in his capacity, to support the maintenance team objective to ensure efficient site support and good availability and reliability of rotating equipment. HSE Commitment: Demonstrate personal commitment to the HSSE policy of the Company Maintain awareness of and ensure compliance with all relevant Statutory and Company HSE standards

The holder of this position must have the following qualifications: Bachelor's Degree in Enginering, Vibration ISO Cat II Certification, based on the ISO 18436-3 Ability to use sensors and other monitoring equipment to collect data on the performance of equipment (Infrared thermography / Vibration monitoring / Oil analysis / Ultrasonic analysis / Pressure analysis / Electrical analysis) +10 years’ experience minimum in the maintenance field on oil and gas production installations, 5 years experience in Condition Based and Predictive Maintenance Experience in maintenance support and especially in field maintenance capacity Good knowledge or CBM tools (OROS, Bentley Nevada, OneProd, Allen Bradley, etc...) Good knowledge of planning tools, and of CMIMS tools (preferably SAP based) Fluent in English, knowledge of French & Portuguese language recommended Physical ability to work on offshore installations in the climatic conditions of the site,
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45044 - Instrument Specialist* M/F

Thu, 15 Oct 2026 07:59:00 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Ensures that COMPANY's HSE regulations are respected. Ensures the planning, preparation, scheduling, coordination, and execution of preventive and corrective maintenance activities within his area of responsibility, while considering production constraints and ensuring the availability of required resources, materials, and spare parts, Oversees and ensures the effective maintenance, monitoring, troubleshooting, and restoration of Instrumentation and Control Systems, utilities, and equipment under his responsibility to maintain operational reliability and availability. Uses and maintains CMMS data, intervention reports, and inventory information to manage maintenance activities, monitor performance, prepare technical reports, and drive continuous improvement in safety, reliability, equipment preservation, and cost optimization. Coordinates with third-party vendors for troubleshooting, repair, and refurbishment activities, ensures proper feedback following interventions, and identifies opportunities for equipment and installation improvements. Ensures that the transfer of knowledge by mentoring occurs properly within his teams. Carries out, at the COMPANY request, any intervention within his field of competence. Methods Provide support in repair, installation, and commissioning Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance Verifies the quality of his teams’ interventions by frequent on-site checks, Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

The holder of this position must have the following qualifications: Bachelor's Degree in Control & Instrumentation Engineering, Control Systems Engineering, or a related Engineering discipline +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Instrumentation and Control Systems (PFD and P&ID diagrams, Instrument list and I/O list, Specifications and data sheets, Valve, relief valve and pressure reducing valve calculations, Layout and routing plans, Assembly standards, Equipment parts lists, Terminal block and BJ plans, Grouping cabinet plans, Control room and technical room layout plans, Loop diagrams, Interconnection diagrams) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-45042 - Mechanical Specialist* M/F

Thu, 15 Oct 2026 07:57:25 Z

Type de contrat : Durée déterminée
Description du poste :
Main activities: Organizes the mechanical maintenance operations on site, Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. Assists specialists working under Specific Maintenance Contracts (SMC), Ensures that COMPANY’s HSE regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his responsibility, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Manage the maintenance all mechanical equipment (Gearboxes, Pumps, Compressors, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters). Troubleshooting and repairing malfunctions in mechanical systems, Air compressors, Gas lift compressor, Water injection systems, Cranes, pumps, etc. Reading and interpreting drawings, blueprints, and schematics. Asset Care routine to ensure PM/CM close-out and Integrity of Asset maintained. Methods Provide support in repair, installation, and commissioning Analyses indicators provided by the CMMS, stock management and intervention reports with a view to improving maintenance in his area (HSE, availability, preservation of equipment, optimization of costs), Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance programs and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications. Quality Assurance In addition to audits and reviews as above mentioned he participates in periodic meetings with GMC and SMC to ensure proper surveillance. Also, designs, follows-up and optimizes maintenance concepts in close cooperation with the GMCs and SMCs.

The holder of this position must have the following qualifications: Bachelor Degree in Mechanical Engineering +15 years’ experience minimum in the maintenance field on oil and gas production installations Good knowledge of Gearboxes, Gas compressor, Cranes, Accumulators, heat exchangers, Fans, Lifeboats, Liferaft, Diesel generators SDG/EDG, Firefighting package, Strainers & filters, Pumps (Centrifugal, Diaphragm, Piston, Gear, Peristaltic, Dosing, Lubrication pumps), Compressors (Piston, Scroll, Screw, Centrifugal, Vane compressors) SAP/R3 experience and know-how Physical ability to work on offshore installations in the climatic conditions of the site, Working language: English Bright 3.5 (or equivalent) Fluent in English, knowledge of French & Portuguese language recommended Strong leadership, reliability and work confidentiality.
Lieu de travail : Offshore
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle
Langue / Niveau :
Français : C-Maitrise professionnelle usuelle
Langue / Niveau :
Portugais : C-Maitrise professionnelle usuelle

2026-44954 - MECHANICAL SUPERVISOR* M/F

Tue, 06 Oct 2026 10:32:02 Z

Type de contrat : Durée déterminée
Description du poste :
Operations Organises on site the maintenance operations which are placed under his responsibility. With his teams assists specialists on the organisation and coordination of the work. Ensures that the COMPANY’s HSE regulations are respected, especially procedures related to Work Permits, as well as approved operating procedures and standard industry practice during preparation and performance of maintenance operations placed under his responsibility. Monitors the functioning of utilities and equipment placed under his responsibility. Takes part in daily, weekly and coordination meetings on site. Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself. Manages the team of technicians directly under his responsibility. Methods Identifies, in the preparatory stage of maintenance works, any delicate operations and ensures that proper studies of the risks involved are carried out beforehand. Warns support teams of any recurring problems related to the availability or quality of spare parts. Suggests improvements and requests modifications. Quality Assurance Verifies the quality of his teams’ interventions by frequent on-site checks. Ensures that the members of his teams have the qualifications and skills required for the tasks entrusted to them and, if need be, suggests corrective measures.

5 to 10 years’ experience in the maintenance field on oil and gas production installations. Basic knowledge of the process of oil and gas treatment installations and a thorough knowledge of the equipment used in oil and gas treatment installations. Specific Professional Knowledge CMMS: SAP R3 is an advantage. Mechanical: turbines (LM2500, FRAME V, MARS/CENTAUR, SOLAR, etc.) – compressors (THERMODYN) – pumps (FLOWSERVE, SULZER). Electrical: high voltage cells, generators, UPS. Instrumentation: Nothing special. Other Requirements Ability to lead and motivate multi-national teams. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Languages: English necessary, French and Portuguese an advantage.
Lieu de travail : BLOCK 17
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-44871 - Senior Drilling Supervisor M/F

Tue, 29 Sep 2026 09:31:07 Z

Type de contrat : Durée déterminée
Description du poste :
Operations & Execution: Supervise on-site drilling operations progress to ensure safe, cost-effective execution within timeframes and compliance with SSHE rules, guidelines, and local regulations. Supervision: Lead the on-site drilling team (Drilling Supervisor, SSHE Supervisor, Marine Supervisor, Material Coordinator) aligning logistics, engineering, and daily lookahead plans. Safety & Regulatory Compliance: Enforce SSHE Management System, Well Management System (WMS), Management of Contractors and Suppliers Standard (MCS), and statutory requirements. Actively participate in JSAs, pre-tour meetings, HAZIDs, HAZOPs, and risk assessments. Permitting & Reporting: Prepare "Permits to Work" in advance, serve as the WORKSITE representative authorizing platform work, and submit daily operation reports to COMPANY and VENDOR administration.

Total & Core Experience: At least 10 years of offshore well operations, with a minimum of 5 years in senior drilling supervision. Regional Experience: Proven experience in Gulf of Thailand operations, offline activities, and development, exploration, and appraisal well operations. Operational Scope: Exposure to completion and workover. Knowledge of well site operations to supervise drilling, completion, and fluids/cement programs execution. Broad equipment/services knowledge (rig move, drilling/completion, rigging up/down, directional drilling, casing running, fluids/cement mixing & pumping, P&A, SIMOPS, and logistics). Certifications:Active IWCF Well Control (Drilling Level 4) certificate (valid during operations). Basic offshore safety training: T-BOSIET, H2S awareness, first aid, fire-fighting. Languages: Strong written and spoken English skills.
Lieu de travail : Offshore, Songkhla base, Thailand
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-44780 - Subsea Production Engineering M/F

Sat, 26 Sep 2026 22:20:09 Z

Type de contrat : Contrat international
Description du poste :
SPIE Global Services Energy is currently looking for Subsea Production Engineering to join its workforce here in Angola. Key Responsibilities: Subsea Operations Ensure with all involved entities that subsea interventions are well planned and prepared. Identification of SIMOPS related to subsea operations. Follow-up of the production & maintenance related operations (onshore preparation, logistic, equipment/tooling/personal mob/demob, etc.) in liaison with Operating departments and ITV for the operational Optimisation of SIMOPS. Engineering Studies Definition of the scope of work and participate to engineering studies related to the improvement or the correction of subsea equipment. Validation of the studies and the repaired/modified equipment. Proposition of improvement to operating issues. Proposition of methods or means to reduce cost and optimise resources. Contribution to the realisation of modification/improvement. Main Repairs/Modifications Follow-up Contribution to define the scope of the project and more specifically review with Operating Departments and DT/ITV the operability and the maintainability of the proposed sub-sea facilities. Validation as required operating philosophy of the project. Participation to the project start-up phase in liaison with the respective Operating Departments. Management Contribution to the budget building. Development of junior engineers. Contribution to the integration of the DB17 future developments by providing comprehensive REX. Participation to internal and international conference on Subsea and prepare papers accordingly.

Experience & Background Subsea engineering degree in Chemical/Petroleum or equivalent. Minimum 5 years' experience in oil and gas process/production, project construction/management, preferably in a deep offshore environment. Excellent multi-discipline technical background to be able to participate actively in the evaluation of operational issues and their possible solutions. Knowledge of onshore/offshore process and production systems, well performance, well integrity, operations and project management. Leadership & Collaborative working relationships with offshore.
Lieu de travail : Luanda
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-44821 - Senior Power System Study Engineer M/F

Wed, 23 Sep 2026 10:20:33 Z

Type de contrat : Durée déterminée
Description du poste :
• Ability to discuss technical matters directly with client and defend engineering conclusions based on sound technical analysis. • Strong contract awareness and ability to distinguish contractual requirements from client preferences. • Ability to prevent overengineering and effectively push back on excessive or non-contractual client requests. • Ability to prepare concise and technically robust submissions to facilitate client review and approval. • Ability to develop engineering justification packages for temporary power systems and tie-ins to permanent facilities.

• More than 10 years of experience as an Electrical System Engineer for power system study. • Proven ETAP experience, including completion of at least one project. • Experience preparing, reviewing, and submitting Load Flow, Short Circuit, Earthing, and Relay Coordination Studies as project deliverables. • Familiarity with: - Load Assessment - Load Flow Studies - Short Circuit Studies - Protection Coordination Studies - Earthing / Grounding Verification - Relay and MCCB Setting Validation - Backfeed and Isolation Philosophy Reviews • Experience in brownfield projects and live-plant modifications is highly desirable. • Experience supporting approvals for temporary power connections and temporary-to-permanent facility tie-ins. • Immediate requirement for an initial 3-6 month “office” assignment, with potential extension depending on project needs and performance.
Lieu de travail : South Jakarta, South Jakarta City, Jakarta, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44820 - Electrical Responsible Person / Electrical Superintendent M/F

Wed, 23 Sep 2026 10:13:02 Z

Type de contrat : Durée déterminée
Description du poste :
- Capable of leading commissioning and energization activities for switchgear, transformers, MCCs, UPSs, generators, and power distribution systems. - Good understanding of protection systems, relay testing, and power system operation. - Coordinate with Operations, Construction, Commissioning, Engineering, and HSE teams. - Demonstrated leadership and stakeholder management capability. - Preparing and approving electrical isolation and energization procedures.

- 10+ years of experience in electrical construction, commissioning, start-up, and plant operations. - Proven Electrical Superintendent experience in oil & gas, LNG, petrochemical, or power projects. - Strong background in electrical safety management, including LOTO, electrical isolation, PTW, and energization control. - Experience preparing and approving electrical isolation and energization procedures. - Expected “field” assignment duration: approximately 1-2 years (9 weeks on / 3 weeks off rotation), with possible extension.
Lieu de travail : South Jakarta, South Jakarta City, Jakarta, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44783 - TAR Lifting Engineer M/F

Sat, 19 Sep 2026 16:26:08 Z

Type de contrat : Durée déterminée
Description du poste :
Planning Phase · Develop detailed lifting plans in accordance with project requirements and site regulations. · Prepare lifting studies and lifting method statements. · Define crane requirements and lifting equipment specifications. · Plan lifting activities for: o Equipment installation and removal o Material handling o Scaffolding materials o Temporary facilities o N2 spread equipment o Tools and consumables o Truck loading and unloading operations · Coordinate lifting requirements with Operations Support Supervisors and Construction teams. · Define laydown and staging areas. Site Preparation Phase · Verify lifting routes and lifting locations. · Confirm crane access and setup required materials for crane access. · Conduct field assessment and lifting feasibility studies. · Coordinate mobilization of cranes and lifting equipment. · Review lifting risks and mitigation measures. TAR Execution Phase · Support lifting operations on site. · Verify compliance with approved lifting plans. · Coordinate crane utilization and lifting schedules. · Monitor critical and heavy lift activities. · Provide technical support to field supervisors and lifting crews. · Ensure lifting activities are executed safely and efficiently. Close-Out Phase · Support demobilization of lifting equipment. · Review lifting performance and lessons learned. · Assist in preparation of final lifting reports.

· Experience in refinery, LNG, petrochemical, offshore, or oil & gas shutdown projects. · Demonstrated experience in lifting engineering and crane lifting. · Knowledge of lifting standards and safety regulations. · Experience preparing lifting plans and lifting studies over the 15 years. · Strong field coordination and problem-solving skills. The TAR Lifting Engineer is responsible for planning, reviewing, and coordinating all lifting activities required during TAR. The role develops lifting plans to ensure safe and efficient movement of materials, equipment, scaffolding, temporary facilities, tools, and operational support resources throughout all project phases.
Lieu de travail : South Jakarta, South Jakarta City, Jakarta, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44781 - TAR Operation Support Deputy Lead M/F

Sat, 19 Sep 2026 16:23:23 Z

Type de contrat : Durée déterminée
Description du poste :
Planning Phase (Jakarta Office) · Review Client-issued Isolation and De-Isolation Plans (IDP). · Support development of detailed TAR execution plans. · Coordinate manpower requirements, heavy equipment, tools, and consumables. · Support subcontractor mobilization planning. · Coordinate procurement of materials including gaskets, bolts, nuts, hand tools, and operational consumables. · Participate in schedule development and resource optimization. Site Preparation Phase · Verify field conditions against approved plans. · Identify discrepancies between engineering plans and actual site conditions. · Support revision of plans where required. · Coordinate preparation activities including scaffolding, lifting equipment, temporary facilities, access arrangements, lighting systems, and N2 spread deployment. · Ensure readiness for TAR execution. TAR Execution Phase · Support day-to-day operation support activities during shutdown execution. · Coordinate with Client’s Operations personnel and supervisors. · Monitor subcontractor performance and work progress. · Assist in execution of valve isolation, positive isolation installation/removal, nitrogen purging, steaming, and system reinstatement activities. · Support shift operations as the back-to-back counterpart of the Operation Support Lead. · Ensure work activities are executed safely and in accordance with approved procedures. Close-Out Phase · Support de-isolation activities. · Coordinate return of temporary equipment and tools. · Support site clean-up and demobilization activities. · Assist preparation of final reports and lessons learned.

· Experience in refinery, petrochemical, LNG, gas processing, or offshore shutdown/turnaround projects. · Familiarity with isolation management and operational support activities. · Experience managing a team of over 50 personnel. · Experience managing subcontractors and site resources. · Strong coordination and communication skills. · More than 10 years of management experience in the oil and gas field. The Operation Support Deputy Lead will support the TAR Operation Support Lead in planning, preparation, execution, and close-out activities for Shutdown event. The role is responsible for coordinating manpower, equipment, materials, subcontractors, and operational support activities in accordance with the Client’s Isolation and De-Isolation Plans (IDP). During the TAR execution phase, the Deputy Lead acts as the Operation Support Lead's back-to-back partner and supports shift operations to ensure safe and efficient execution of TAR activities.
Lieu de travail : South Jakarta, South Jakarta City, Jakarta, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44782 - TAR Operation Support Supervisor M/F

Sat, 19 Sep 2026 16:22:19 Z

Type de contrat : Durée déterminée
Description du poste :
Planning Phase · Develop detailed execution plans for assigned IDP packages. · Prepare activity-specific work plans including: o Scaffolding arrangements o Temporary access planning o Nitrogen spread deployment o Temporary lighting arrangements o Equipment positioning plans o Operational support requirements · Estimate manpower, tools, and equipment requirements. · Coordinate with Lifting Engineers and other disciplines. Site Preparation Phase · Verify field conditions and constructability. · Coordinate scaffold erection and temporary facility installation. · Check readiness of equipment, tools, and materials. · Tagging and bagging of materials prior to shutdown execution. · Support work front preparation including the heavy equipment arrangement. · Resolve field constraints prior to shutdown execution. TAR Execution Phase · Act as field focal point between Client supervisors and subcontractor workforce. · Direct and supervise subcontractor activities. · Coordinate: o Valve Isolation o Positive Isolation Installation o Positive Isolation Removal o Nitrogen Purging o Steaming Activities (including draining of HC) o System Reinstatement Activities · Monitor subcontractor’s execution progress and manpower deployment. · Ensure compliance with HSE requirements. · Escalate issues and provide solutions to maintain schedule. Close-Out Phase · Coordinate de-isolation activities. · Support equipment de-mobilization. · Verify work completion. · Packing of remaining materials and tools for preservation. · Participate in close-out reporting and lessons learned.

· Shutdown/Turnaround (TAR) experience in Oil & Gas facilities. · Familiarity with plant operations and isolation systems. · Experience supervising subcontractor workforces. · Strong field coordination and leadership capabilities. · More than 10 years of supervisor experience in the Oil & Gas field. The TAR Operation Support Supervisor is responsible for developing and implementing detailed operational support plans based on the Client's Isolation and De-Isolation Plans (IDP). The Supervisor directly manages field execution through subcontractors and ensures TAR operational activities are safely and efficiently completed.
Lieu de travail : South Jakarta, South Jakarta City, Jakarta, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44625 - Cost Control Services M/F

Mon, 07 Sep 2026 11:00:20 Z

Type de contrat : Durée déterminée
Description du poste :
1. Monitor and control contract expenditures and budget utilization. 2. Prepare cost reports, forecasts, accruals, and financial summaries. 3. Track actual costs against budget and contractual commitments. 4. Identify potential cost overruns and recommend mitigation measures. 5. Support invoice verification and payment processes. 6. Maintain cost databases and expenditure records. 7. Provide cost analysis to support management decision-making. 8. Coordinate with Contract Admin and COMPANY representatives on financial matters.

1. Bachelor's Degree (S1) in Accounting, Finance, Economics, Engineering, Business Administration, or related disciplines. 2. Minimum 5 years of experience in cost control, project controls, budgeting, forecasting, or project accounting. 3. Strong analytical and financial reporting skills. 4. Proficient in Microsoft Excel and cost reporting systems. 5. Experience in Oil & Gas, EPC, or industrial projects is preferred. 6. Fluent in written and spoken English. 7. Having Valid KTP ( Indonesia ID )
Lieu de travail : Balikpapan, Balikpapan City, East Kalimantan, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44624 - Contract Admin Services M/F

Mon, 07 Sep 2026 10:56:44 Z

Type de contrat : Durée déterminée
Description du poste :
1. Manage contract-related documentation, correspondence, and records. 2. Maintain personnel records, work orders, deliverables, and document registers. 3. Coordinate submission of reports, invoices, timesheets, and supporting documents. 4. Track contract milestones, deliverables, and administrative requirements. 5. Support personnel onboarding and documentation processes. 6. Arrange meetings, prepare minutes of meetings, and monitor action items. 7. Ensure proper filing, retention, and retrieval of project documents. 8. Provide administrative support to COMPANY and project teams.

1. Bachelor's Degree (S1) in Business Administration, Management, Engineering, Accounting, Finance, or related disciplines. 2. Minimum 3 years of experience in contract administration, project administration, document control, or similar functions. 3. Familiarity with service contracts and document management processes. 4. Strong organizational and communication skills. 5. Proficient in Microsoft Office applications. 6. in written and spoken English. 7. Having Valid KTP ( Indonesia ID )
Lieu de travail : Balikpapan, Balikpapan City, East Kalimantan, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44623 - Junior HSEQ Engineer / Specialist Services M/F

Mon, 07 Sep 2026 10:47:02 Z

Type de contrat : Durée déterminée
Description du poste :
1. Support implementation of HSEQ assurance programs and compliance verification activities. 2. Conduct routine inspections, observations, and field monitoring. 3. Collect, compile, and maintain HSEQ performance data. 4. Assist in preparing HSEQ reports, audit records, and compliance documentation. 5. Support incident investigations and tracking of corrective actions. 6. Monitor close-out of findings and action items. 7. Participate in audits, assessments, and safety improvement initiatives. 8. Ensure proper documentation and reporting of all assigned activities.

1. Bachelor's Degree (S1) in Engineering, Occupational Health & Safety, Environmental Engineering, Industrial Engineering, or related disciplines. 2. Minimum 3 years of experience in HSEQ, Quality, Inspection, Audit, Operations, or Assurance activities. 3. Basic understanding of HSEQ management systems, audits, and risk assessment methodologies. 4. Good analytical, reporting, and communication skills. 5. Proficient in Microsoft Office applications. 6. Fluent in written and spoken English. 7. Having Valid KTP ( Indonesia ID )
Lieu de travail : Balikpapan, Balikpapan City, East Kalimantan, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle

2026-44622 - HSEQ Engineer / Specialist Services M/F

Mon, 07 Sep 2026 10:40:44 Z

Type de contrat : Durée déterminée
Description du poste :
1. Execute HSEQ audits, inspections, and assurance programs. 2. Perform compliance reviews against COMPANY requirements and applicable regulations. 3. Review risk assessments, work procedures, and HSEQ documentation. 4. Monitor HSEQ performance indicators and identify trends or recurring issues. 5. Participate in incident investigations and verification of corrective actions. 6. Evaluate contractor HSEQ performance and compliance status. 7. Prepare technical reports, audit findings, and recommendations. 8. Support continuous improvement initiatives related to HSEQ performance.

1. Bachelor's Degree (S1) in Engineering, Occupational Health & Safety, Environmental Engineering, Industrial Engineering, or related disciplines. 2. Minimum 5 years of experience in HSEQ, Quality, Risk Management, Compliance Monitoring, Audit, or Assurance functions in the Oil & Gas industry. 3. Experience conducting inspections, audits, field assessments, and compliance verification. 4. Good understanding of HSEQ regulations, industry standards, and risk management processes. 5. Proficient in technical report preparation and data analysis. 6. Fluent in written and spoken English. 7. Having Valid KTP ( Indonesia ID )
Lieu de travail : Balikpapan, Balikpapan City, East Kalimantan, Indonesia
Langue / Niveau :
Anglais : E-Bilingue ou Langue Maternelle