Export RSS des offres - Seulement les offres à la une : Non / Pays : Europe-->Danemark, Moyen-Orient/Afrique du Nord-->Irak

2026-42394 - Electrical/HVAC Engineer H/F

Thu, 07 May 2026 22:15:21 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION : Responsible for all ELECTRICAL & HVAC preparation subjects (systems, packages, or plant) under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the site team Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability. • Take charge of Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparation standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Preparations - focal point for clarifications where required.

Experience in ELECTRICAL Systems in the Offshore Environment Professional experience: 5 years in Oil & Gas business especially in work preparations or related fields. Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), E-vision permit Systems and other Preparations, Tools/Resources.
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-43115 - CAMPAIGN LEAD (onshore) H/F

Mon, 27 Apr 2026 08:08:33 Z

Type de contrat : Durée indéterminée
Description du poste :
Management & Coordination of SMART Team resources and workload. Responsible of work performed by SMART Team and Campaign team. Responsible for Middle and long-term planning management in support to the planner. Advice Planning Team of useful information concerning SMART Team in order to optimize scheduling. Establishes and maintains a strong safety culture in line with TEPDK and NorSPIE HSEQ Requirements and Rules. Ensures that TEPDK and NorSPIE HSEQ Policies and regulations are respected (especially procedures related to Work Permits), as well as approved operating procedures and standard industry practice during performance of maintenance operations placed under his/her responsibility. Ensures compliance with Operating Procedures & Guidelines with the assets to ensure Process Safety, Operational Safety and Plan Integrity. Participates in the continuous improvement of NorSPIE Integrated Management System: Leads or participates in Root Cause Analyses (RCA) following HSE incidents or Quality non conformities and ensures effective implementation and follow up of all corrective and preventive actions. Maintains and updates all documents within his/her area of responsibility. Take particular attention to the planning linked to the SECE equipment. Organizes the maintenance operations which are placed under his responsibility (Campaigns, shutdowns, temporary reinforcements as required, …). Maintenance activities planning and work preparation is provided by the Preparation Team. Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. With his teams assists specialists working under Specific Maintenance Contracts (SMC) linked to his activities, Manages interventions using the CMMS and checks intervention reports in the CMMS (including those concerning SMC) and writes the technical reports related to his field, Ensure the provision of adequate tools and equipment to carry out his teams works, Reviews WO with Preparation team works in case of doubts, Monitors the functioning of utilities and equipment placed under his responsibility, Ensures that the transfer of knowledge by mentoring occurs properly within his teams, and actively participates in this himself, Carries out any intervention within his field of competence. Takes in charge the systems under his responsibility in case of breakdown until correct operation status. Review on a daily basis with the CSR or the OIM the needs to carry out works according to planning. Continuous Improvement Identifies recurrent corrective maintenance interventions, analyses them and suggests improvements, Keeps a critical eye on current preventive maintenance program and, if need be, suggests improvements, Warns support teams of any recurring problems related to the availability or quality of spare parts, Suggests improvements and requests modifications.

Demonstrate good sense of organization and team management. Wide knowledge and background of maintenance activities on offshore oil and gas platform and in particular competence/experience in the relevant specialties (mechanical/fitting, handling, tooling, electricity, instruments). Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site.
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2024-36075 - Production Supervisor M/F

Sun, 19 Apr 2026 10:38:32 Z

Type de contrat : Contrat international
Description du poste :
Job Purpose: This position is a unique opportunity to manage the day-to-day Plants operations and First-degree Maintenance programs at an onshore field that produces oil. Your main duties will be to:- · To organize the day-to-day Plant activities, managing the operators dispatching, following up tasks execution and reporting the feed back to the production superintendent in liaison with the control room. · To prepare commissioning procedures · To act as site representative for commissioning and/or startup operations. · To supervise the operating parameters of the production and utility process’s/equipment. · To organize the execution of level one and level 2 maintenance including minor repairs on production equipment’s. · To supervise the coordination of the work permit execution, applying precautions/conditions highlighted, ensuring the tidiness of the area, and managing the Permit to work tracking system. · To advise the Production Superintendent of any potential hazardous situation or changes to operating conditions and implements any actions necessary to maintain safe continuous hydrocarbon production. · To manage the shift organization of operators under his resp. · To ensure the validity of the well tests according to procedures and well performance program for new wells considering well start up procedure emitted by WPWI Eng. · To prepare the daily report. · To enforce the waste management philosophy on the Plant. · To supervise the operations under his resp. as HSE representative regarding the safety and environment policy. · Supervise in person the delicate or risky field operations. · Assume the operational responsibilities as part of the work permit. · Ensure that all activities are conducted in respect of HSE Group standards and in accordance to the Italian regulations Promote Company’s HSE and quality policies, rules, procedures, and programs; Implement actions in order to reach Company’s HSE objectives; Promote safety and environment awareness. Accountabilities: · Manage the Chemicals supply and monitoring on the Plant if necessary related to his responsibilities. · To ensure that plants and equipment run according to operating procedures, Company rules and production requests. · Supervision of main production parameters, downgraded situations, shifts hand over; etc… · To ensure that operations activities are conducted in compliance with safety and environmental protection.

Candidate profile: Ideally you will have graduated in chemical/production engineering with a minimum experience of 5/10 years of experience in Totalenergies affiliate within working in operation. You are fluent in Arabic, and fluency in English or French would be an advantage. You will have good interpersonal and organizational skills, as well as, a good level of computer literacy and be proficient in Microsoft Office.
Lieu de travail : basra
Langue / Niveau :
Arabe : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète
Langue / Niveau :
Français : D-Maitrise professionnelle complète

2026-42905 - Completion officer (ICAPS) M/F

Sun, 12 Apr 2026 08:14:15 Z

Type de contrat : Interim
Description du poste :
The Completion Officer supports the implementation and management of the system completion process on site, ensuring proper tracking, certification, and handover of systems and subsystems in line with project requirements. Working under the Commissioning Site Lead (CSL) and in coordination with discipline leads, the Completion Officer ensures accurate population and follow-up of completion databases within a brownfield and SIMOPS environment. Key Responsibilities Support the implementation of the system/subsystem breakdown and completion strategy Populate and maintain the completion database (SCDB / ICAPS) Track and follow up on: Mechanical Completion (MC) Pre-Commissioning and Commissioning status Punch lists and close-out Ensure proper handover dossiers and certification are prepared and aligned with OPERCOM requirements Interface with discipline leads and contractors to ensure data accuracy and completeness Monitor progress and report completion status, KPIs, and gaps Support audits and ensure compliance with project procedures Assist in coordination between site teams and remote completion/commissioning teams

Qualifications & Experience Minimum 5 in Oil & Gas Experience with system completion processes Hands-on experience with SCDB / ICAPS (mandatory or strong advantage) Experience in onshore and brownfield projects Skills & Competencies Good coordination and communication skills Ability to work in multidisciplinary and fast-paced environments Proficient with completion systems and reporting tools
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42904 - COM LEAD ELE / MECHA / I&C / PIPING / PROCESS M/F

Sun, 12 Apr 2026 08:10:16 Z

Type de contrat : Interim
Description du poste :
Role Overview Each Commissioning Discipline Lead is responsible for managing and executing commissioning activities for their respective discipline on site, under the supervision of the Commissioning Site Lead (CSL). Key Responsibilities Lead and supervise discipline-specific commissioning activities on site Manage execution teams (supervisors, technicians). Ensure execution in line with OPERCOM, project procedures, and HSE standards Coordinate with CSL on: Planning and priorities Technical issues and interfaces. Ensure proper system/subsystem completion and handover readiness Support pre-commissioning, commissioning, and start-up phases. Identify and resolve technical issues and constraints. Operate within SIMOPS and brownfield conditions. Report progress, risks, and KPIs Disciplines- I&C Commissioning Lead PVV Commissioning Lead ELE Commissioning Lead MECA Commissioning Lead Process Commissioning Lead

Qualifications & Experience Minimum 10–15 years Oil & Gas experience Proven experience in: Onshore commissioning Brownfield / SIMOPS environments Experience managing site teams
Lieu de travail : Ratawi field
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42903 - COMMISSIONING SITE LEAD M/F

Sun, 12 Apr 2026 08:04:02 Z

Type de contrat : Interim
Description du poste :
The Commissioning Site Lead (CSL) is the senior commissioning representative on site for the project. The project consists of debottlenecking activities across three main EPC scopes: Central Processing Facility (CPF) Flowlines & well pad Pipelines The CSL operates within a dual (mirror) organizational structure, where: The CSL is responsible for ensuring seamless coordination between site execution and remote engineering leadership, guaranteeing safe, compliant, and efficient commissioning delivery in a complex brownfield and SIMOPS environment. The CSL leads the on-site commissioning organization, composed of local discipline leads, supervisors, and technicians. The Commissioning Manager (COM) and Expat Discipline Leads are based remotely. Lead and coordinate all on-site commissioning activities across CPF, flowlines, and pipeline scopes. Manage and supervise local commissioning teams, including discipline leads, supervisors, and technicians. Ensure all commissioning activities are executed in accordance with: OPERCOM methodology Project procedures and specifications. Manage execution within a brownfield environment under SIMOPS constraints Ensure proper system and subsystem definition, completion, and handover Monitor and drive systemization, punch list clearance, and readiness status. Coordinate with the COM and remote discipline leads on: Commissioning planning and prioritization Technical decision-making Issue resolution and risk mitigation Support critical commissioning phases, including: Pre-commissioning Energization Start-up readiness Lead or support troubleshooting activities on site in coordination with remote specialists

Qualifications & Experience Minimum 15 years of experience in Oil & Gas Minimum 5 years of experience on TotalEnergies commissioning projects (mandatory). Previous experience in Iraq or similar high-risk environments is highly desirable. Proven experience in: Onshore commissioning projects Brownfield / debottlenecking environments Strong familiarity with: OPERCOM methodology System completion tools and processes (SCDB / ICAPS is a strong advantage). Rotation- 28/28
Lieu de travail : Ratawi site
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-42393 - CRANE PREPARATION TECHNICIAN H/F

Sun, 05 Apr 2026 22:19:45 Z

Type de contrat : Durée indéterminée
Description du poste :
GENERAL DESCRIPTION : Responsible for all Cranes subject under the frame of responsibilities. Ensure conformance to TEPDK rules, best standards, and general legislations. Ensure delivery of Work Preparations and support to maintenance activities of the Site team. Establish and maintain a strong safety culture in line with TEPDK and NorSPIE HSE Requirements and Rules. Ensuring that TEPDK and NorSPIE’s QHSE regulations and procedures are applied. Give his/her contribution in hazard analyses, incident investigations in root cause failure analyses, process incidents advising his/her hierarchy about QHSE issue or opportunities and proposing corrective solutions. MAIN FUNCTIONS : • Contribute to ensure adherence to stipulated GMC scope of services and improved performance of all Technical KPIs, Preparations, Backlog Control Planning and Equipment availability/reliability Take charge of Cranes Work Orders under his/her responsibility and ensure the accuracy of detailed technical elements during preparations. • Ensure Work Orders are accurately resourced, all materials, tools, and services are identified and pre-planned in CMIMS for execution at site and work location. • Review procedures/work instructions and ensure adaptability, review functional locations and related WO lists to ensure that all outstanding works in the concerned package/system are fully considered during the preparations and planning. • Ensure that Permit to Work are properly prepared in line with the defined procedures and ready ahead of execution datelines (typical 5 Weeks to the execution start date). • Ensure compliance to the best preparations standard practices and in line with TEPDK defined principles and guidelines by ensuring minimal unapproved Crane WOs under the scope of responsibility, platforms or packages, especially those critical to Safety and production (defined WOs Priorities, SECE, Vital Equipment etc.). • As a principle and in adherence to the set GMC KPI, the work preparer shall try to maintain at all times a threshold of ≤ 5% INIT of the total open work order count, under the frame of responsibilities. • On a daily basis, the PM04 preparations guideline shall help to define the priorities of the daily tasks. All activities requested by the Clients to be managed as a higher priority within the frame of contract shall be checked with the GMC Mechanical Preparations – Team Lead for clarifications where required.

Experience in maintenance operations support. Good knowledge of planning and CMIMS tools (preferably SAP based), Evision permit Systems and other Preparations, Tools/Resources. Skills required: Computer Literacy, Preparations tools proficiency, Ability to work in a multicultural organization, good presentation and communication skills
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42795 - PVV Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:52:21 Z

Type de contrat : Durée indéterminée
Description du poste :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify safe execution of pressure testing, nitrogen leak testing, and line blowing activities. • Review risk assessments and JSAs prior to critical activities (hydrotest, pneumatic test, chemical cleaning, nitrogen displacement). • Ensure strict control of temporary test equipment and test packs. • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor PVV Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated gauges, and test equipment. • Assist Contractor in resolving technical interface issues when required. 2.3 Technical Oversight – PVV Scope Witness, review and validate Contractor execution of: • Line checking against P&ID and Isometrics • Hydrostatic testing of piping systems • Pneumatic testing where applicable • Flushing, blowing and cleaning activities (water flushing, air blowing, steam blowing as applicable) • Drying and preservation activities • Valve inspection • Verification of correct installation of spectacle blinds and spades • Final reinstatement after testing Ensure no pressure test or system release occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test packs o Hydrotest dossiers o Method statements o Inspection & Test Records (ITRs) o Pressure charts and calibration certificates • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in P&IDs and Isometrics. • Review final PVV Pre-Commissioning dossier before handover.

• Degree or Diploma in Mechanical Engineering or related discipline • Minimum 5 years Oil & Gas experience • Minimum 3 years in Piping / Mechanical Pre-Commissioning roles • Previous experience in SIMOPS environments • Strong knowledge of pressure testing standards (ASME, project specifications) • Familiarity with TotalEnergies General Specifications preferred
Lieu de travail : Ratawi Oil Field, North Rumaila
Langue / Niveau :
Arabe : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42794 - Instrumentation Pre-Commissioning Supervisor M/F

Thu, 02 Apr 2026 12:49:31 Z

Type de contrat : Durée indéterminée
Description du poste :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight • Ensure Contractor compliance with TotalEnergies HSE standards. • Verify strict control of live systems and interface with energized electrical panels. • Review risk assessments and JSAs prior to critical activities • Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance • Supervise Contractor Instrumentation Pre-Commissioning activities. • Verify adequacy of manpower, certified technicians, calibrated instruments, and testing equipment. • Ensure calibration benches and tools comply with project requirements. • Assist Contractor in resolving technical or interface issues when required. • Ensure proper sequence between: o Pre-Commissioning o Commissioning • Ensure subsystem boundaries are respected in line with OPERCOM philosophy. 2.3 Technical Oversight – Instrumentation Scope Witness, review and validate Contractor execution of: • Instrument calibration (pressure, temperature, level, flow transmitters) • PSV / safety instrument checks (as applicable within scope) • Loop checking (field to DCS/ESD/PLC) • Marshalling cabinet inspections • JB (Junction Box) inspection and continuity verification • Impulse air tubing and leak testing • DCS / ESD I/O verification (interface with ICSS team) • Cause & E􀆯ect (C&E) test preparation support Ensure no loop closure or live signal testing occurs without Company validation. 2.4 Documentation & Quality Control • Review and approve: o Test procedures o Method statements o Calibration certificates o Inspection & Test Records (ITRs) o Loop folders o Pre-Commissioning dossiers • Monitor punch list identification and closure (A/B/C categories as per project). • Ensure redline markups are properly reflected in loop diagrams and hook-ups. • Review final Instrumentation Pre-Commissioning dossier before handover. • Raise observations and request corrective actions when required.

• Degree or Diploma in Instrumentation / Electrical & Instrumentation Engineering • Minimum 5 years Oil & Gas experience • Minimum 3 years in Instrumentation Pre-Commissioning / Commissioning roles • Previous experience in SIMOPS environments • Familiarity with TotalEnergies General Specifications preferred
Lieu de travail : Ratawi Oil Field, North Rumaila
Langue / Niveau :
Arabe : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-42793 - Electrical Precom Supervisor M/F

Thu, 02 Apr 2026 12:45:52 Z

Type de contrat : Durée indéterminée
Description du poste :
2. Main Responsibilities 2.1 HSE & SIMOPS Oversight  Ensure Contractor compliance with TotalEnergies HSE standards.  Review risk assessments and JSAs prior to critical activities.  Challenge unsafe practices and stop works if necessary. 2.2 Contractor Supervision & Assistance  Supervise Contractor Electrical Pre-Commissioning activities.  Verify adequacy of manpower, tools, calibrated instruments, and test equipment.  Assist Contractor in resolving technical issues when required.  Ensure proper sequence between: o Mechanical Completion o Pre-Commissioning o Commissioning. 2.3 Technical Oversight – Electrical Scope Witness, review and validate Contractor execution of:  IR & continuity testing  HV / MV / LV cable testing  Transformer pre-energization checks  Switchgear inspection  Protection relay testing  Earthing & lightning protection verification  Motor solo runs  UPS & battery testing  Energization procedures  Interface loop checks (with Instrument team) Ensure no energization occurs without Company validation. 2.4 Documentation & Quality Control  Review and approve: o Test procedures o Method statements o Inspection & Test Records (ITRs) o Energization dossiers  Monitor punch list closure.  Ensure redline markups are properly reflected.  Review final Pre-Commissioning dossier before handover.  Raise observations and request corrective actions when required.

3. Required Qualifications  Degree in Electrical  Minimum 5 years Oil & Gas experience.  Minimum 3 years in Pre-Commissioning / Commissioning Electrical roles.  Previous experience in SIMOPS environments.  Familiarity with TotalEnergies General Specifications preferred.
Lieu de travail : Ratawi Oil Field, North Rumaila
Langue / Niveau :
Arabe : E-Bilingue ou Langue Maternelle
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-41936 - CONTRACT SITE REPRESENTATIVE (CSR) H/F

Wed, 25 Feb 2026 23:18:54 Z

Type de contrat : Durée indéterminée
Description du poste :
PURPOSE Under the authority of Contract Manager/Deputy Contract Manager and the SAS Technical Manager, he organises and plans maintenance operations on site, whether these are carried out by his own teams or by subcontractors. He is the technical and HSE management representative of NorSpie on site. He is responsible for the on-site management of NorSpie’s maintenance teams (administrative, operational, coordination, professional). HSE: Ensures HSE policy fulfilment during his activities. Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. Ensures compliance with HSE (occupational and process) Legislation, Company Standards Procedures under his area of responsibility to ensure employees safety, legislative compliance, and responsible environment attitude. Ensure mandatory aspects (including those concerning local law scenario) are properly implemented for all activities carried out (including the collective tool certification). Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety. Operational Safety and Plan Integrity. Contribution in Hazard Analyses, incident investigations, Root Cause Failure Analyses, process incidents advising his hierarchy about HSE issues and proposing corrective solutions. Ensures record keeping and reporting of action items from Process Hazard Analyses, Incident Investigations, Root Cause. OPERATIONS Working closely with TotalEnergies’ site maintenance superintendent, He: Advises TotalEnergies superintendent on 2 weeks, monthly and annual planning, - Distributes the daily activity to the supervisors as prepared by the planning team, - Coordinates the maintenance and inspections operations, - Accountable of the site contractual performances (including the KPI). Methods - Ensures the appropriateness of the operating and maintenance procedures and tools employed by his crews and, if necessary, suggests improvements to TotalEnergies’ maintenance superintendent, - Ensures co-ordination between maintenance operations and Preparation teams, - Keeps an up-to-date list of work that cannot be performed except during inspections of machines or shutdowns, - Suggests corrective measures to TotalEnergies if this backlog threatens to become unmanageable, Team Leading Responsible for his teams on site: - Ensures the correct behaviour of his teams in accordance with the general safety regulations of the subsidiary and, if need be, takes the necessary corrective measures, - With the assistance of NorSpie base support, he organises the rotation schedules of his teams (administrative and logistical requirements, crew changes, etc.) - Identifies the training needs of his teams and makes training requests as appropriate. - Manages the Nationalisation plan and proposes all necessary adjustments.

Experience in offshore activities. Proven ability to lead and motivate large multi-national dedicated team. Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent and independent in his field, show common sense, organization ability and responsibility. Rigorous and methodical in his approach to operation in particular handling operation Must be able to anticipate and analyze situation. Natural authority, founded on his abilities and on the trust, he has in his team. Play a predominant role in the transfer of skills to personnel undergoing training by mentoring on site.
Lieu de travail : esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-41937 - GAS TURBINE PACKAGE COORDINATOR H/F

Mon, 16 Feb 2026 08:50:54 Z

Type de contrat : Durée indéterminée
Description du poste :
HSE • Establishes and maintains a strong safety culture in line with Company HSE Requirements and Rules. • Ensures that Client’s and NorSpie’s HSE regulations are observed (especially procedures related to Control of work), as well as approved operating procedures, standard industry practice and Danish regulation during performance of maintenance operations placed under his responsibility. • Ensures compliance with Operating Procedures & Guidelines with the asset to ensure Process Safety, Operational Safety and Plan Integrity. GENERAL DESCRIPTION Purpose • He is responsible for the reliability and integrity of turbo machines. • He ensures that maintenance operations under his responsibility are carried out in strict accordance with TEPDK’s current safety rules and operating procedures and in accordance with standard industry practice, thereby guaranteeing the quality of maintenance operations, within his field, carried out on site by NorSPIE. Planning • Participate and review the preventive maintenance program/planning for his scope of work. • Organises and ensures the progress of the onsite maintenance equipment under his supervision liaising with SITE, planning Engineer and interface with onshore support team of requirements for spare parts and materials and opportunity jobs. • Assists the planning team by giving any technical support for the preparation of the jobs in his discipline. • Manages interventions using the CMMS. Operations • Organises on site the maintenance operations which are related to turbo machines by coordinating supervisors. • Conduct periodic checks and routine maintenance work. Inspect turbines daily, • Participates in condition monitoring checks on gas turbines. • Executes all maintenance routines in time, • Monitors the operational performance of the gas turbines, running parameters and auxiliaries’ operations using the condition monitoring techniques. • Check tools and spares parts defined for turbogenerators and their auxiliaries • Carries out performance test as required • Performs ad-hoc repairs and all agreed breakdown repair in accordance with manufacturer recommendation and requirements. • Assists specialists working under Specific Maintenance Contracts (SMC), • Enters intervention reports in the CMIMS (including those concerning SMC) and writes the technical reports related to his field, • Takes in charge the turbo packages in case of breakdown until correct operation status. • Assists operation team in conducting the turbo machines.

Highly experienced Maintenance Technician in compressors, turbines, …and knowledge of O&G industry processes Pride in his work, ability to maintain good relations with colleagues and others. Physical ability to work on offshore installations in the climatic conditions of the site. Perfectly competent in his field, must show common sense, organization ability, autonomy, and responsibility. He must be able to anticipate and analyze situations to avoid any safety issue and report to hierarchy the progress of works and alert in case of risks.
Lieu de travail : Esbjerg
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle

2026-41879 - Commissioning superintendent - Nightshift M/F

Mon, 02 Feb 2026 08:09:28 Z

Type de contrat : Durée déterminée
Description du poste :
Job Description – Commissioning Superintendent (Night Shift) Project: Onshore Oil & Gas Project Location: Iraq Rotation: 4 weeks ON / 4 weeks OFF Working Shift: Night Shift Discipline: Mechanical / Process (preferred) Reporting Line: Commissioning Manager 1. Role & Objective The Commissioning Superintendent – Night Shift shall act as the Company Commissioning representative during night shift activities. He is responsible for ensuring the safe, compliant, and efficient execution of commissioning activities in accordance with TotalEnergies standards, project procedures, and the approved commissioning strategy. 2. Scope of Responsibilities 2.1 Commissioning Supervision Represent the Commissioning team during all night shift commissioning activities. Ensure commissioning activities are performed in line with approved procedures, commissioning philosophy (OPERCOM), and ICAPS requirements. Verify system readiness prior to commissioning activities. Monitor punch list status and ensure timely clearance in coordination with Construction and Commissioning teams. Support troubleshooting and resolution of technical issues arising during night shift operations. 2.2 Interface & Coordination Act as the focal point for night shift commissioning activities. Ensure proper coordination between Construction, Commissioning, Operations readiness, and HSE teams. Perform structured handover with day shift teams to ensure continuity and alignment of activities. Interface with Client representatives as required during night shift. 2.3 HSE & Compliance Ensure strict compliance with TotalEnergies HSE rules, Life Saving Rules, and project HSE procedures. Enforce safe execution of commissioning activities, including SIMOPS management. Immediately stop any unsafe activity and report HSE events in accordance with project escalation procedures. 2.4 ICAPS & Documentation Ensure correct and timely update of ICAPS status for systems and subsystems under commissioning. Validate commissioning dossiers, test records, and handover documentation generated during night shift. Ensure commissioning activities contribute to system completion and handover milestones. 2.5 Reporting Prepare and issue daily night shift commissioning reports. Report progress, deviations, risks, and constraints impacting commissioning objectives. Escalate critical issues to the Commissioning Manager without delay.

Minimum 10 years of experience in Oil & Gas commissioning activities. Proven experience on onshore Oil & Gas projects. Experience on TotalEnergies projects is a strong plus Proven hands-on experience with ICAPS commissioning management system. Background in Mechanical or Process engineering (preferred) Previous experience in a Commissioning Superintendent / Senior Commissioning Engineer role. Strong understanding of commissioning methodologies, system handover, and operations readiness.
Lieu de travail : Iraq, Basra region
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-41864 - E&I Construction Superintendent M/F

Thu, 29 Jan 2026 08:01:35 Z

Type de contrat : Interim
Description du poste :
NA

NA
Lieu de travail : Total Energies Artawi field - AGUP1 Project
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2026-41497 - Construction Superintendant (nightshift) M/F

Fri, 02 Jan 2026 07:13:58 Z

Type de contrat : Interim
Description du poste :
Role Purpose Serve as the client’s focal point for all construction activities during night operations, ensuring safe execution, discipline coordination, progress continuity, and compliance with project standards across mechanical, civil, electrical, instrumentation, and supporting works. Key Responsibilities Lead and supervise night-shift construction activities on behalf of the client. Monitor contractor performance, workfront readiness, manpower deployment, and productivity. Ensure strict adherence to HSE rules, method statements, permits, and work procedures. Provide field coordination across disciplines and resolve site-level technical or interface issues. Verify work quality, installation practices, and alignment with drawings and specifications. Coordinate with day-shift leadership to ensure smooth handover and continuity of works. Prepare night-shift reports, progress updates, and early warnings for risks or delays. Act as the primary contact for emergencies, incidents, or unexpected work conditions during night operations.

Msc in Mechanical or Civil Engineering (mandatory). Broad working knowledge of other disciplines (E&I, piping, structural, utilities). 8+ years’ experience in construction supervision on major industrial / oil & gas projects. Proven experience in shift-based or brownfield/live-site environments preferred. Strong leadership, coordination, and safety stewardship mindset.
Lieu de travail : Basra, Ratawi field, Iraq
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2025-40993 - D&W Safety Advisor M/F

Wed, 12 Nov 2025 12:12:35 Z

Type de contrat : Durée indéterminée
Description du poste :
SUPPORT  Ensure permanent control of the application of the Company’s HSE Management System and Bridging Documents requirements between Contractors involved in operations & Company.  Support Company’s Senior Supervisor to identify and minimize risks especially downgraded situations. Participate in performing Operational Risk Analysis and job analysis for critical tasks.  Participate in Kick off meetings, Pre spud meetings, daily meetings. Participate randomly in Pre Job Meetings.  Ensure and/or Deliver HSE inductions at the activity sites.  Ensure HSE training compliance of the personnel on site (H2S, ERW,…)  Coach and mentor crews in all aspects of daily HSE best practices as well as the company HSE Golden rules.  Contribute to compliance with Company’s HSE Objectives. Follow up on progress. Generate and propose improvements.  Ensure communication of Return of Experience on all HSE related matters (e.g. Safety Feedback Notices). Participate in HSE performance improvement with recommendations of initiatives based on audit results or analysis of incidents.  Organize implementation/training/sensibilization of Company’s HSE campaigns.  Coordinate the implementation and updating of Contractors' emergency plans, as well as collaborate in the organization of emergency/accident drills.  Participate in the investigation and analysis of incidents/accidents/anomalies (participate in Cause Tree analysis when required). Consolidate and issue investigation report. Follow up the implementation of identified actions.  Assist the Company’s Senior Supervisor in the organization and preparation of Site HSE Committee presentation and minutes.  Verification of location status upon completion of Rig disassembly and prior to location Handover.  Controls the trafficability and condition of the roads before starting the DTM. Collaborates in the preparation and dissemination of the "Road Map".  Being trained as CPLO (Competent person for lifting personnel) Level 1  Assist Company’s Senior Supervisor on SIMOPS follow-up.  Ensure compliance of site activity with Company’s Waste Management Plan. REPORTING  Ensure monitoring and reporting of HSE key performance indicators (KPI) set by the Company.  Maintain updated HSE boards at the activity sites.  Perform the upload, update, follow-up and closure of Cases in the Synergi system.  Ensure the correct analysis, follow-up and improvement of reported anomalies in a reliable database.  Keep a record of corrective actions arising from internal/external audits, HSE tours and incident/accident reports. AUDITS & INSPECTIONS  Contribute to the organization of internal/external audits, technical reviews, HSE Tours. Follow up of actions taken.  Perform spot audits (PTW, Check List of vehicles, Contractor's facilities, Camp, equipment and tools, Canteen…)  Control FiFi system, means of evacuation/rescue and meeting points.

The job holder should have a minimum of 7 years of experience in Oil & Gas industry and a minimum of 5 years as Safety Advisor (or equivalent) on Drilling & Completion operations. Experience on onshore operations is a plus. Dynamic, proactive, very organized and detail oriented. Fluent in English, fluency in Arabic appreciated. Advise the Company’s Senior Supervisor on HSE matters. Contribute to ensure that activities are carried out according to the Company's HSE Policies and procedures (procedures, downgraded Situation Management Plan, Oil Spill Contingency Plan, Waste Management Plan, Bridging documents, Medevac ...). Ensure Site’s HSE reporting. Participate to HSE reviews and audits.  Ensure that information on all serious incidents/accidents is immediately communicated to the Company’s Senior Supervisor and an appropriate investigation, analysis and classification report is established promptly.
Lieu de travail : artawi
Langue / Niveau :
Anglais : D-Maitrise professionnelle complète

2025-40700 - Drilling Engineer M/F

Mon, 13 Oct 2025 07:05:52 Z

Type de contrat : Durée déterminée
Description du poste :
HSE Adopt and demonstrate exemplarity towards HSE rules with associated enforcement and control within his area of responsibility. Prevent major incidents (blow out, loss of asset, wells integrity issues) through detailed and reliable engineering studies Ensure compliance with TE referential and actively support the preparation of derogations to the rules when required. Drilling campaign preparation & readiness Participate and contribute to the elaboration of the well SOR (Scope Of Requirement) jointly with D&W & GSR entities. Perform or contribute to studies required for the preparation of the AGUP campaigns. Coordinate as required with completion team. Update Basis of Design document as required. Prepare Standard Operating Procedure. Contribute to risk assessments and contingency plans. Prepare technical documents and participate in meetings/presentations with authorities and partners when required. Organize and lead the pre-spud meeting and contribute to the DWOP (Drill Well On Paper). Operations follow-up & close-out He/she is assigned to 1 drilling unit along with a drilling superintendent. Design and prepare drilling programs. Ensure adherence to TE referential, Basis of Design and validated work program. In charge of the daily operations & performances follow-up and reporting. In charge of issuing drilling program and of producing Standard Operating Procedure to cover overburden sections ensure integrating latest operational learnings and/or design updates. Perform and/or coordinate studies to improve the operational performances. Perform QAQC check to ensure Wellview is properly and accurately filled up. Perform daily QAQC of well trajectory data, Daily Drilling Reports and invoicing/cost sheets Evaluate drilling parameters / events and interpret to advise as required in potential optimization and improvements, or potential problems to come. Be part of technical/HSE incidents investigation teams (when required). Manage the RTOC linked to drilling rig operation Contribute to the preparation of Management of Change and issue same in collaboration with DCSI. Actively support DCSI to prepare LLI plans for upcoming wells and ensure all sub-assemblies are prepared by service providers. Organize and present to operational team activities program to come through Pre-Spud and Pre-Phase meetings on the rig. Support drilling & completion team in the well integrity assessment as required. Perform visit to the wellsite to support operations (when required). Contribute to the good functioning of the Well Construction entity by supporting the operational engineering team.

Petroleum Industry MSc (or equivalent professional experience) with 5 to 10 years’ experience in Drilling activities (Engineering and Operations) Valid IWCF certification and up to date HSE training Very good interpersonal skills and ability to work within an international team of engineers English fluent
Lieu de travail : North Rumaila
Langue / Niveau :
Anglais : C-Maitrise professionnelle usuelle